The only PLL using multiple enable sequences is the 28nm PLL, which just does the single step in the loop. Push that support back into the PLL code.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Abhinav Kumar abhinavk@codeaurora.org Tested-by: Stephen Boyd swboyd@chromium.org # on sc7180 lazor --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 3 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 23 +++++-- .../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 3 +- drivers/gpu/drm/msm/dsi/phy/dsi_pll.c | 65 +++++++------------ drivers/gpu/drm/msm/dsi/phy/dsi_pll.h | 4 +- 5 files changed, 42 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 6a63901da7a4..4386edfa91fe 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -1087,8 +1087,7 @@ struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
pll_14nm->vco_delay = 1;
- pll->en_seq_cnt = 1; - pll->enable_seqs[0] = dsi_pll_14nm_enable_seq; + pll->enable_seq = dsi_pll_14nm_enable_seq;
ret = pll_14nm_register(pll_14nm); if (ret) { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c index 2f502efa4dd5..760cf7956fa2 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c @@ -311,7 +311,7 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { /* * PLL Callbacks */ -static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) +static int _dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) { struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); struct device *dev = &pll_28nm->pdev->dev; @@ -386,6 +386,19 @@ static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) return locked ? 0 : -EINVAL; }
+static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) +{ + int i, ret; + + for (i = 0; i < 3; i++) { + ret = _dsi_pll_28nm_enable_seq_hpm(pll); + if (!ret) + return 0; + } + + return ret; +} + static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll) { struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); @@ -619,15 +632,11 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev, if (type == MSM_DSI_PHY_28NM_HPM) { pll_28nm->vco_delay = 1;
- pll->en_seq_cnt = 3; - pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm; - pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm; - pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm; + pll->enable_seq = dsi_pll_28nm_enable_seq_hpm; } else if (type == MSM_DSI_PHY_28NM_LP) { pll_28nm->vco_delay = 1000;
- pll->en_seq_cnt = 1; - pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp; + pll->enable_seq = dsi_pll_28nm_enable_seq_lp; } else { DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type); return ERR_PTR(-EINVAL); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c index 4a40513057e8..2cfb7edf91d8 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c @@ -515,8 +515,7 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev, pll->save_state = dsi_pll_28nm_save_state; pll->restore_state = dsi_pll_28nm_restore_state;
- pll->en_seq_cnt = 1; - pll->enable_seqs[0] = dsi_pll_28nm_enable_seq; + pll->enable_seq = dsi_pll_28nm_enable_seq;
ret = pll_28nm_register(pll_28nm); if (ret) { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c index 3dc65877fa10..9e9fa90bf504 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c @@ -5,46 +5,6 @@
#include "dsi_pll.h"
-static int dsi_pll_enable(struct msm_dsi_pll *pll) -{ - int i, ret = 0; - - /* - * Certain PLLs do not allow VCO rate update when it is on. - * Keep track of their status to turn on/off after set rate success. - */ - if (unlikely(pll->pll_on)) - return 0; - - /* Try all enable sequences until one succeeds */ - for (i = 0; i < pll->en_seq_cnt; i++) { - ret = pll->enable_seqs[i](pll); - DBG("DSI PLL %s after sequence #%d", - ret ? "unlocked" : "locked", i + 1); - if (!ret) - break; - } - - if (ret) { - DRM_ERROR("DSI PLL failed to lock\n"); - return ret; - } - - pll->pll_on = true; - - return 0; -} - -static void dsi_pll_disable(struct msm_dsi_pll *pll) -{ - if (unlikely(!pll->pll_on)) - return; - - pll->disable_seq(pll); - - pll->pll_on = false; -} - /* * DSI PLL Helper functions */ @@ -64,15 +24,36 @@ long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw, int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw) { struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + int ret = 0;
- return dsi_pll_enable(pll); + /* + * Certain PLLs do not allow VCO rate update when it is on. + * Keep track of their status to turn on/off after set rate success. + */ + if (unlikely(pll->pll_on)) + return 0; + + ret = pll->enable_seq(pll); + if (ret) { + DRM_ERROR("DSI PLL failed to lock\n"); + return ret; + } + + pll->pll_on = true; + + return 0; }
void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw) { struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- dsi_pll_disable(pll); + if (unlikely(!pll->pll_on)) + return; + + pll->disable_seq(pll); + + pll->pll_on = false; }
void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev, diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h index bbecb1de5678..eebf90671eec 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h @@ -12,7 +12,6 @@ #include "dsi.h"
#define NUM_DSI_CLOCKS_MAX 6 -#define MAX_DSI_PLL_EN_SEQS 10
struct msm_dsi_pll { enum msm_dsi_phy_type type; @@ -23,9 +22,8 @@ struct msm_dsi_pll {
unsigned long min_rate; unsigned long max_rate; - u32 en_seq_cnt;
- int (*enable_seqs[MAX_DSI_PLL_EN_SEQS])(struct msm_dsi_pll *pll); + int (*enable_seq)(struct msm_dsi_pll *pll); void (*disable_seq)(struct msm_dsi_pll *pll); int (*get_provider)(struct msm_dsi_pll *pll, struct clk **byte_clk_provider,