On Tue, 14 Jun 2022 at 11:58, Alexander Stein alexander.stein@ew.tq-group.com wrote:
Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER might have several causes, these messages help finding the origin.
Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com
- New in v2
drivers/gpu/drm/bridge/ti-sn65dsi83.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c index b27c0d7c451a..a306150a8027 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c @@ -677,7 +677,7 @@ static int sn65dsi83_probe(struct i2c_client *client, ctx->enable_gpio = devm_gpiod_get_optional(ctx->dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(ctx->enable_gpio))
return PTR_ERR(ctx->enable_gpio);
return dev_err_probe(dev, PTR_ERR(ctx->enable_gpio), "failed to get enable GPIO\n"); usleep_range(10000, 11000);@@ -687,7 +687,7 @@ static int sn65dsi83_probe(struct i2c_client *client,
ctx->regmap = devm_regmap_init_i2c(client, &sn65dsi83_regmap_config); if (IS_ERR(ctx->regmap))
return PTR_ERR(ctx->regmap);
return dev_err_probe(dev, PTR_ERR(ctx->regmap), "failed to get regmap\n"); dev_set_drvdata(dev, ctx); i2c_set_clientdata(client, ctx);-- 2.25.1
Reviewed & applied series to drm-misc-next.
Reviewed-by: Robert Foss robert.foss@linaro.org