Add DP support to display-connector driver. The driver will support HPD via a GPIO and DP PWR.
DP PWR will be enabled at probe, which is not optimal, but I'm not sure what would be a good place to enable and disable DP PWR. Perhaps attach/detach, but I don't know if enabling HW is something that attach is supposed to do.
In any case, I don't think there's much difference in power consumption between the version in this patch and enabling the regulator later: if the driver probes, supposedly it will attach very soon afterwards, and we need to enable the DP PWR as soon as possible.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com --- drivers/gpu/drm/bridge/display-connector.c | 46 +++++++++++++++++++++- 1 file changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c index 4d278573cdb9..05eb759da6fc 100644 --- a/drivers/gpu/drm/bridge/display-connector.c +++ b/drivers/gpu/drm/bridge/display-connector.c @@ -11,6 +11,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h>
#include <drm/drm_bridge.h> #include <drm/drm_edid.h> @@ -20,6 +21,8 @@ struct display_connector {
struct gpio_desc *hpd_gpio; int hpd_irq; + + struct regulator *dp_pwr; };
static inline struct display_connector * @@ -172,11 +175,12 @@ static int display_connector_probe(struct platform_device *pdev) of_property_read_string(pdev->dev.of_node, "label", &label);
/* - * Get the HPD GPIO for DVI and HDMI connectors. If the GPIO can provide + * Get the HPD GPIO for DVI, HDMI and DP connectors. If the GPIO can provide * edge interrupts, register an interrupt handler. */ if (type == DRM_MODE_CONNECTOR_DVII || - type == DRM_MODE_CONNECTOR_HDMIA) { + type == DRM_MODE_CONNECTOR_HDMIA || + type == DRM_MODE_CONNECTOR_DisplayPort) { conn->hpd_gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN); if (IS_ERR(conn->hpd_gpio)) { @@ -223,6 +227,38 @@ static int display_connector_probe(struct platform_device *pdev) } }
+ /* Get the DP PWR for DP connector. */ + if (type == DRM_MODE_CONNECTOR_DisplayPort) { + int ret; + + conn->dp_pwr = devm_regulator_get_optional(&pdev->dev, "dp-pwr"); + + if (IS_ERR(conn->dp_pwr)) { + ret = PTR_ERR(conn->dp_pwr); + + switch (ret) { + case -ENODEV: + conn->dp_pwr = NULL; + break; + + case -EPROBE_DEFER: + return -EPROBE_DEFER; + + default: + dev_err(&pdev->dev, "failed to get DP PWR regulator: %d\n", ret); + return ret; + } + } + + if (conn->dp_pwr) { + ret = regulator_enable(conn->dp_pwr); + if (ret) { + dev_err(&pdev->dev, "failed to enable DP PWR regulator: %d\n", ret); + return ret; + } + } + } + conn->bridge.funcs = &display_connector_bridge_funcs; conn->bridge.of_node = pdev->dev.of_node;
@@ -251,6 +287,9 @@ static int display_connector_remove(struct platform_device *pdev) { struct display_connector *conn = platform_get_drvdata(pdev);
+ if (conn->dp_pwr) + regulator_disable(conn->dp_pwr); + drm_bridge_remove(&conn->bridge);
if (!IS_ERR(conn->bridge.ddc)) @@ -275,6 +314,9 @@ static const struct of_device_id display_connector_match[] = { }, { .compatible = "vga-connector", .data = (void *)DRM_MODE_CONNECTOR_VGA, + }, { + .compatible = "dp-connector", + .data = (void *)DRM_MODE_CONNECTOR_DisplayPort, }, {}, };