Re: [PATCH V4] dt-bindings: gpu: Convert v3d to json-schema

On Wed, 2021-01-13 at 20:08 +0100, Stefan Wahren wrote:

This converts the v3d bindings to yaml format.

Signed-off-by: Stefan Wahren stefan.wahren@i2se.com

Reviewed-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de

Regards, Nicolas

Changes in V4:

• define order for required reg-names
• adapt example

Changes in V3:

• drop redundant maxItems in case we already have items defined
• fix order of reg-names enum
• tag required items in description
• add reg-names to required properties
• drop clock-names

.../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 33 ----------  .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 75 ++++++++++++++++++++++  2 files changed, 75 insertions(+), 33 deletions(-)  delete mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt  create mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml

diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt deleted file mode 100644 index b2df82b..0000000 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt +++ /dev/null @@ -1,33 +0,0 @@ -Broadcom V3D GPU

-Only the Broadcom V3D 3.x and newer GPUs are covered by this binding. -For V3D 2.x, see brcm,bcm-vc4.txt.

-Required properties: -- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" -- reg: Physical base addresses and lengths of the register areas -- reg-names: Names for the register areas. The "hub" and "core0"

•   register areas are always required.  The "gca" register area
  

•   is required if the GCA cache controller is present.  The
  

•   "bridge" register area is required if an external reset
  

•   controller is not present.
  

-- interrupts: The interrupt numbers. The first interrupt is for the hub,

•   while the following interrupts are separate interrupt lines
  

•   for the cores (if they don't share the hub's interrupt).
  

•   See bindings/interrupt-controller/interrupts.txt
  

-Optional properties: -- clocks: The core clock the unit runs on -- resets: The reset line for v3d, if not using a mapping of the bridge

•   See bindings/reset/reset.txt
  

-v3d {

• compatible = "brcm,7268-v3d";
• reg = <0xf1204000 0x100>,

•      <0xf1200000 0x4000>,
  

•      <0xf1208000 0x4000>,
  

•      <0xf1204100 0x100>;
  

• reg-names = "bridge", "hub", "core0", "gca";
• interrupts = <0 78 4>,

•      <0 77 4>;
  

-}; diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml new file mode 100644 index 0000000..fbce844 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#

+title: Broadcom V3D GPU Bindings

+maintainers:

• • Eric Anholt eric@anholt.net
• • Nicolas Saenz Julienne nsaenzjulienne@suse.de

+properties:

• $nodename:
• pattern: '^gpu@[a-f0-9]+$'
• compatible:
• enum:

•  - brcm,7268-v3d
  

•  - brcm,7278-v3d
  

• reg:
• items:

•  - description: hub register (required)
  

•  - description: core0 register (required)
  

•  - description: GCA cache controller register (if GCA controller present)
  

•  - description: bridge register (if no external reset controller)
  

• minItems: 2
• reg-names:
• items:

•  - const: hub
  

•  - const: core0
  

•  - enum: [ bridge, gca ]
  

•  - enum: [ bridge, gca ]
  

• minItems: 2
• maxItems: 4
• interrupts:
• items:

•  - description: hub interrupt (required)
  

•  - description: core interrupts (if it doesn't share the hub's interrupt)
  

• minItems: 1
• clocks:
• maxItems: 1
• resets:
• maxItems: 1
• power-domains:
• maxItems: 1

+required:

• • compatible
• • reg
• • reg-names
• • interrupts

+additionalProperties: false

+examples:

• • |
• gpu@f1200000 {

•  compatible = "brcm,7268-v3d";
  

•  reg = <0xf1200000 0x4000>,
  

•        <0xf1208000 0x4000>,
  

•        <0xf1204000 0x100>,
  

•        <0xf1204100 0x100>;
  

•  reg-names = "hub", "core0", "bridge", "gca";
  

•  interrupts = <0 78 4>,
  

•               <0 77 4>;
  

• };

+...