Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode.
Support is added for three panels: An AU Optronics 10.1" WSVGA, a Chunghwa Picture Tubes 10.1" WXGA and a Panasonic 10.1 WUXGA TFT LCD panel.
Signed-off-by: Thierry Reding treding@nvidia.com --- .../devicetree/bindings/panel/panel-simple.txt | 25 ++ drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/panel/Kconfig | 13 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-simple.c | 335 +++++++++++++++++++++ 5 files changed, 375 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/panel-simple.txt create mode 100644 drivers/gpu/drm/panel/Makefile create mode 100644 drivers/gpu/drm/panel/panel-simple.c
diff --git a/Documentation/devicetree/bindings/panel/panel-simple.txt b/Documentation/devicetree/bindings/panel/panel-simple.txt new file mode 100644 index 0000000..dfd4b76 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/panel-simple.txt @@ -0,0 +1,25 @@ +Simple display panel + +Required properties: +- compatible: should be one of: + - "auo,b101aw03": AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - "cptt,claa101wb03": Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - "pc,vvx10f004b00": Panasonic Corporation 10.1" WUXGA TFT LCD panel + +Optional properties: +- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing +- power-supply: regulator to provide the supply voltage +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Example: + + panel: panel { + compatible = "cptt,claa101wb01"; + ddc-i2c-bus = <&panelddc>; + + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio 90 0>; + + backlight = <&backlight>; + }; diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 9b009c7..764a5ec 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -57,3 +57,4 @@ obj-$(CONFIG_DRM_TILCDC) += tilcdc/ obj-$(CONFIG_DRM_QXL) += qxl/ obj-$(CONFIG_DRM_MSM) += msm/ obj-y += i2c/ +obj-y += panel/ diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 2ddd5bd..843087b 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -2,3 +2,16 @@ menuconfig DRM_PANEL bool "DRM panel support" help Panel registration and lookup framework. + +if DRM_PANEL + +config DRM_PANEL_SIMPLE + bool "support for simple panels" + depends on OF + help + DRM panel driver for dumb panels that need at most a regulator and + a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +endif diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile new file mode 100644 index 0000000..af9dfa2 --- /dev/null +++ b/drivers/gpu/drm/panel/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c new file mode 100644 index 0000000..e38cd6f --- /dev/null +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -0,0 +1,335 @@ +/* + * Copyright (C) 2013, NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/backlight.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_panel.h> + +struct panel_desc { + const struct drm_display_mode *modes; + unsigned int num_modes; + + struct { + unsigned int width; + unsigned int height; + } size; +}; + +struct panel_simple { + struct drm_panel base; + + const struct panel_desc *desc; + + struct backlight_device *backlight; + struct regulator *supply; + + unsigned long enable_gpio_flags; + int enable_gpio; +}; + +static inline struct panel_simple *to_panel_simple(struct drm_panel *panel) +{ + return container_of(panel, struct panel_simple, base); +} + +static void panel_simple_dpms(struct drm_panel *panel, int mode) +{ + struct panel_simple *p = to_panel_simple(panel); + int err; + + if (mode == DRM_MODE_DPMS_ON) { + if (p->supply) { + err = regulator_enable(p->supply); + if (err < 0) + dev_err(panel->dev, + "failed to enable supply: %d\n", + err); + } + + if (gpio_is_valid(p->enable_gpio)) { + if (p->enable_gpio_flags & GPIO_ACTIVE_LOW) + gpio_set_value(p->enable_gpio, 0); + else + gpio_set_value(p->enable_gpio, 1); + } + } + + if (p->backlight) { + if (mode != DRM_MODE_DPMS_ON) + p->backlight->props.power = FB_BLANK_POWERDOWN; + else + p->backlight->props.power = FB_BLANK_UNBLANK; + + backlight_update_status(p->backlight); + } + + if (mode == DRM_MODE_DPMS_OFF) { + if (gpio_is_valid(p->enable_gpio)) { + if (p->enable_gpio_flags & GPIO_ACTIVE_LOW) + gpio_set_value(p->enable_gpio, 1); + else + gpio_set_value(p->enable_gpio, 0); + } + + if (p->supply) + regulator_disable(p->supply); + } +} + +static int panel_simple_get_modes(struct drm_panel *panel) +{ + struct panel_simple *p = to_panel_simple(panel); + struct drm_display_mode *mode; + unsigned int i; + + for (i = 0; i < p->desc->num_modes; i++) { + mode = drm_mode_duplicate(panel->drm, &p->desc->modes[i]); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + drm_mode_probed_add(panel->connector, mode); + } + + return p->desc->num_modes; +} + +static const struct drm_panel_funcs panel_simple_funcs = { + .dpms = panel_simple_dpms, + .get_modes = panel_simple_get_modes, +}; + +static const struct drm_display_mode auo_b101aw03_mode = { + .clock = 51450, + .hdisplay = 1024, + .hsync_start = 1024 + 156, + .hsync_end = 1024 + 156 + 8, + .htotal = 1024 + 156 + 8 + 156, + .vdisplay = 600, + .vsync_start = 600 + 16, + .vsync_end = 600 + 16 + 6, + .vtotal = 600 + 16 + 6 + 16, + .vrefresh = 60, +}; + +static const struct panel_desc auo_b101aw03 = { + .modes = &auo_b101aw03_mode, + .num_modes = 1, + .size = { + .width = 223, + .height = 125, + }, +}; + +static const struct drm_display_mode chunghwa_claa101wb01_mode = { + .clock = 69300, + .hdisplay = 1366, + .hsync_start = 1366 + 48, + .hsync_end = 1366 + 48 + 32, + .htotal = 1366 + 48 + 32 + 20, + .vdisplay = 768, + .vsync_start = 768 + 16, + .vsync_end = 768 + 16 + 8, + .vtotal = 768 + 16 + 8 + 16, + .vrefresh = 60, +}; + +static const struct panel_desc chunghwa_claa101wb01 = { + .modes = &chunghwa_claa101wb01_mode, + .num_modes = 1, + .size = { + .width = 223, + .height = 125, + }, +}; + +static const struct drm_display_mode panasonic_vvx10f004b00_mode = { + .clock = 154700, + .hdisplay = 1920, + .hsync_start = 1920 + 154, + .hsync_end = 1920 + 154 + 16, + .htotal = 1920 + 154 + 16 + 32, + .vdisplay = 1200, + .vsync_start = 1200 + 17, + .vsync_end = 1200 + 17 + 2, + .vtotal = 1200 + 17 + 2 + 16, + .vrefresh = 60, +}; + +static const struct panel_desc panasonic_vvx10f004b00 = { + .modes = &panasonic_vvx10f004b00_mode, + .num_modes = 1, + .size = { + .width = 217, + .height = 136, + }, +}; + +static const struct of_device_id panel_simple_of_match[] = { + { + .compatible = "auo,b101aw03", + .data = &auo_b101aw03, + }, { + .compatible = "cptt,claa101wb01", + .data = &chunghwa_claa101wb01 + }, { + .compatible = "pc,vvx10f004b00", + .data = &panasonic_vvx10f004b00 + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, panel_simple_of_match); + +static int panel_simple_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + struct device_node *backlight; + struct panel_simple *panel; + enum of_gpio_flags flags; + int err; + + panel = devm_kzalloc(&pdev->dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + id = of_match_node(panel_simple_of_match, pdev->dev.of_node); + if (!id) + return -ENODEV; + + panel->desc = id->data; + + panel->supply = devm_regulator_get_optional(&pdev->dev, "power"); + if (IS_ERR(panel->supply)) { + if (PTR_ERR(panel->supply) != -ENODEV) { + dev_err(&pdev->dev, "failed to get regulator: %ld\n", + PTR_ERR(panel->supply)); + return PTR_ERR(panel->supply); + } + + panel->supply = NULL; + } + + panel->enable_gpio = of_get_named_gpio_flags(pdev->dev.of_node, + "enable-gpios", 0, + &flags); + if (gpio_is_valid(panel->enable_gpio)) { + unsigned int value; + + if (flags & OF_GPIO_ACTIVE_LOW) + panel->enable_gpio_flags |= GPIO_ACTIVE_LOW; + + err = gpio_request(panel->enable_gpio, "enable"); + if (err < 0) { + dev_err(&pdev->dev, "failed to request GPIO#%u: %d\n", + panel->enable_gpio, err); + return err; + } + + value = (panel->enable_gpio_flags & GPIO_ACTIVE_LOW) != 0; + + err = gpio_direction_output(panel->enable_gpio, value); + if (err < 0) { + dev_err(&pdev->dev, "failed to setup GPIO%u: %d\n", + panel->enable_gpio, err); + goto free_gpio; + } + } + + backlight = of_parse_phandle(pdev->dev.of_node, "backlight", 0); + if (backlight) { + panel->backlight = of_find_backlight_by_node(backlight); + if (!panel->backlight) { + err = -EPROBE_DEFER; + goto free_gpio; + } + + of_node_put(backlight); + } + + drm_panel_init(&panel->base); + panel->base.dev = &pdev->dev; + panel->base.funcs = &panel_simple_funcs; + + err = drm_panel_add(&panel->base); + if (err < 0) + goto free_gpio; + + platform_set_drvdata(pdev, panel); + + return 0; + +free_gpio: + if (gpio_is_valid(panel->enable_gpio)) + gpio_free(panel->enable_gpio); + + return err; +} + +static int panel_simple_remove(struct platform_device *pdev) +{ + struct panel_simple *panel = platform_get_drvdata(pdev); + + if (gpio_is_valid(panel->enable_gpio)) { + if (panel->enable_gpio_flags & GPIO_ACTIVE_LOW) + gpio_set_value(panel->enable_gpio, 1); + else + gpio_set_value(panel->enable_gpio, 0); + + gpio_free(panel->enable_gpio); + } + + if (panel->supply) + regulator_disable(panel->supply); + + if (panel->backlight) + put_device(&panel->backlight->dev); + + drm_panel_detach(&panel->base); + drm_panel_remove(&panel->base); + + return 0; +} + +static struct platform_driver panel_simple_driver = { + .driver = { + .name = "panel-simple", + .owner = THIS_MODULE, + .of_match_table = panel_simple_of_match, + }, + .probe = panel_simple_probe, + .remove = panel_simple_remove, +}; +module_platform_driver(panel_simple_driver); + +MODULE_DESCRIPTION("DRM Driver for Simple Panels"); +MODULE_AUTHOR("Thierry Reding treding@nvidia.com"); +MODULE_LICENSE("GPL v2");