Le lun., janv. 31 2022 at 13:26:54 +0100, H. Nikolaus Schaller hns@goldelico.com a écrit :
Originally we proposed a new hdmi-5v-supply regulator reference for CI20 device tree but that was superseded by a better idea to use the already defined "ddc-en-gpios" property of the "hdmi-connector".
Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already been applied to v5.17-rc1, we add this on top.
Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup") Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Reviewed-by: Paul Cercueil paul@crapouillou.net
Cheers, -Paul
arch/mips/boot/dts/ingenic/ci20.dts | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 3e336b3dbb109..ab6e3dc0bc1d0 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -83,6 +83,8 @@ hdmi_out: connector { label = "HDMI OUT"; type = "a";
ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;- port { hdmi_con: endpoint { remote-endpoint = <&dw_hdmi_out>;
@@ -114,17 +116,6 @@ otg_power: fixedregulator@2 { gpio = <&gpf 14 GPIO_ACTIVE_LOW>; enable-active-high; };
- hdmi_power: fixedregulator@3 {
compatible = "regulator-fixed";regulator-name = "hdmi_power";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;gpio = <&gpa 25 0>;enable-active-high;- };
};
&ext { @@ -576,8 +567,6 @@ &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pins_hdmi_ddc>;
- hdmi-5v-supply = <&hdmi_power>;
- ports { #address-cells = <1>; #size-cells = <0>;
-- 2.33.0