The serializer PLL divider is a power-of-two divider, so our calculation which assumes that it's a numerical divider is incorrect. Replace it with one that results in a power-of-two divider value instead.
Tested with all supported modes with a Samsung S24C750.
Signed-off-by: Russell King rmk+kernel@armlinux.org.uk --- drivers/gpu/drm/i2c/tda998x_drv.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 98ec91a55a6a..a31809ce30e2 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -1334,6 +1334,7 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge, struct drm_display_mode *adjusted_mode) { struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge); + unsigned long tmds_clock; u16 ref_pix, ref_line, n_pix, n_line; u16 hs_pix_s, hs_pix_e; u16 vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e; @@ -1404,12 +1405,19 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge, (mode->vsync_end - mode->vsync_start)/2; }
- div = 148500 / mode->clock; - if (div != 0) { - div--; - if (div > 3) - div = 3; - } + tmds_clock = mode->clock; + + /* + * The divisor is power-of-2. The TDA9983B datasheet gives + * this as ranges of Msample/s, which is 10x the TMDS clock: + * 0 - 800 to 1500 Msample/s + * 1 - 400 to 800 Msample/s + * 2 - 200 to 400 Msample/s + * 3 - as 2 above + */ + for (div = 0; div < 3; div++) + if (80000 >> div <= tmds_clock) + break;
mutex_lock(&priv->audio_mutex);