The goal of this patch series is to move away from hardcoding exact eDP panels in device tree files. As discussed in the various patches in this series (I'm not repeating everything here), most eDP panels are 99% probable and we can get that last 1% by allowing two "power up" delays to be specified in the device tree file and then using the panel ID (found in the EDID) to look up additional power sequencing delays for the panel.
This patch series is the logical contiunation of a previous patch series where I proposed solving this problem by adding a board-specific compatible string [1]. In the discussion that followed it sounded like people were open to something like the solution proposed in this new series.
In version 2 I got rid of the idea that we could have a "fallback" compatible string that we'd use if we didn't recognize the ID in the EDID. This simplifies the bindings a lot and the implementation somewhat. As a result of not having a "fallback", though, I'm not confident in transitioning any existing boards over to this since we'll have to fallback to very conservative timings if we don't recognize the ID from the EDID and I can't guarantee that I've seen every panel that might have shipped on an existing product. The plan is to use "edp-panel" only on new boards or new revisions of old boards where we can guarantee that every EDID that ships out of the factory has an ID in the table.
Version 3 of this series now splits out all eDP panels to their own driver and adds the generic eDP panel support to this new driver. I believe this is what Sam was looking for [2].
Version 4 of this series is mostly small fixes / renames from review feedback. It's largely the same as v3. Other than naming / description / comment changes, the differences are: - Dropped the MIPS config patch as per request. - Reorder config patches first. - Added a new patch to use the panel ID scheme for quirks. - Landed the reorder of logicpd_type_28 / mitsubishi_aa070mc01 It could possibly be ready to land?
[1] https://lore.kernel.org/r/YFKQaXOmOwYyeqvM@google.com/ [2] https://lore.kernel.org/r/YRTsFNTn%2FT8fLxyB@ravnborg.org/
Changes in v4: - "u8 *edid" => "void *edid" to avoid cast. - ("Use new encoded panel id style for quirks matching") new for v4. - Don't put kmalloc() in the "if" test even if the old code did. - Don't refer to "panel-simple" in commit message. - PANEL_SIMPLE_EDP => PANEL_EDP - Remove "non-eDP" in panel-simple description. - Reordered config patches to be before code patch - decode_edid_id() => drm_edid_decode_panel_id() - drm_do_get_edid_blk0() => drm_do_get_edid_base_block() - drm_get_panel_id() => drm_edid_get_panel_id() - encode_edid_id() => drm_edid_encode_panel_id() - panel-simple-edp => panel-edp - split panel id extraction out to its own function.
Changes in v3: - ("Better describe eDP panel delays") new for v3. - ("Don't re-read the EDID every time") moved to eDP only patch. - ("Non-eDP panels don't need "HPD" handling") new for v3. - Add AUO B116XAN06.1 to table. - Add Sharp LQ116M1JW10 to table. - Adjust endianness of product ID. - Change init order to we power at the end. - Decode hex product ID w/ same endianness as everyone else. - Fallback to conservative delays if panel not recognized. - Fix "prepare_to_enable" patch new for v3. - Generic "edp-panel" handled by the eDP panel driver now. - Move wayward panels patch new for v3. - Rename delays more generically so they can be reused. - Split eDP panels patch new for v3. - Split the delay structure out patch just on eDP now.
Changes in v2: - Add "-ms" suffix to delays. - Don't support a "fallback" panel. Probed panels must be probed. - No longer allow fallback to panel-simple. - Not based on patch to copy "desc"--just allocate for probed panels.
Douglas Anderson (15): dt-bindings: drm/panel-simple-edp: Introduce generic eDP panels drm/edid: Break out reading block 0 of the EDID drm/edid: Allow querying/working with the panel ID from the EDID drm/edid: Use new encoded panel id style for quirks matching ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDP arm64: defconfig: Everyone who had PANEL_SIMPLE now gets PANEL_EDP drm/panel-edp: Split eDP panels out of panel-simple drm/panel-edp: Move some wayward panels to the eDP driver drm/panel-simple: Non-eDP panels don't need "HPD" handling drm/panel-edp: Split the delay structure out drm/panel-edp: Better describe eDP panel delays drm/panel-edp: hpd_reliable shouldn't be subtraced from hpd_absent drm/panel-edp: Fix "prepare_to_enable" if panel doesn't handle HPD drm/panel-edp: Don't re-read the EDID every time we power off the panel drm/panel-edp: Implement generic "edp-panel"s probed by EDID
.../bindings/display/panel/panel-edp.yaml | 188 ++ arch/arm/configs/at91_dt_defconfig | 1 + arch/arm/configs/exynos_defconfig | 1 + arch/arm/configs/imx_v6_v7_defconfig | 1 + arch/arm/configs/lpc32xx_defconfig | 1 + arch/arm/configs/multi_v5_defconfig | 1 + arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/configs/qcom_defconfig | 1 + arch/arm/configs/realview_defconfig | 1 + arch/arm/configs/sama5_defconfig | 1 + arch/arm/configs/shmobile_defconfig | 1 + arch/arm/configs/sunxi_defconfig | 1 + arch/arm/configs/tegra_defconfig | 1 + arch/arm/configs/versatile_defconfig | 1 + arch/arm/configs/vexpress_defconfig | 1 + arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/drm_edid.c | 281 ++- drivers/gpu/drm/panel/Kconfig | 16 +- drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-edp.c | 1896 +++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 1072 +--------- include/drm/drm_edid.h | 47 + 23 files changed, 2355 insertions(+), 1162 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/panel-edp.yaml create mode 100644 drivers/gpu/drm/panel/panel-edp.c