From: huang lin hl@rock-chips.com
The Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG.
Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - use separate file for binding - keep power supplies as required
Signed-off-by: Lin Huang hl@rock-chips.com Signed-off-by: Heiko Stuebner heiko@sntech.de --- .../display/panel/innolux,p097pfg.txt | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt new file mode 100644 index 000000000000..595d9dfeffd3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt @@ -0,0 +1,24 @@ +Innolux P097PFG 9.7" 1536x2048 TFT LCD panel + +Required properties: +- compatible: should be "innolux,p097pfg" +- reg: DSI virtual channel of the peripheral +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- enable-gpios: panel enable gpio + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel { + compatible = "innolux,p079zca"; + reg = <0>; + avdd-supply = <...>; + avee-supply = <...>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + };