Hey Hsin-Yi,
Thanks for the patch, and sorry about the delays in reviewing this.
This patch does not apply to the drm-misc/for-linux-next branch due to some other changes having been merged.
On Sat, 20 Feb 2021 at 07:10, Hsin-Yi Wang hsinyi@chromium.org wrote:
anx7625 requires 3 power supply regulators.
Signed-off-by: Hsin-Yi Wang hsinyi@chromium.org Reviewed-by: Rob Herring robh@kernel.org
.../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 60585a4fc22bc..3ae97d9523e56 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,15 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1
- vdd10-supply:
- description: Regulator that provides the supply 1.0V power.
- vdd18-supply:
- description: Regulator that provides the supply 1.8V power.
- vdd33-supply:
- description: Regulator that provides the supply 3.3V power.
This chunk below has seen some changes.
With this patch fixed, feel free to add my r-b. Reviewed-by: Robert Foss robert.foss@linaro.org
ports: type: object
@@ -55,6 +64,9 @@ properties: required:
- compatible
- reg
- vdd10-supply
- vdd18-supply
- vdd33-supply
- ports
additionalProperties: false @@ -72,6 +84,9 @@ examples: reg = <0x58>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
vdd10-supply = <&pp1000_mipibrdg>;vdd18-supply = <&pp1800_mipibrdg>;vdd33-supply = <&pp3300_mipibrdg>; ports { #address-cells = <1>;-- 2.30.0.617.g56c4b15f3c-goog