drm's debug system writes 10 distinct categories of messages to syslog using a small API[1]: drm_dbg*(10 names), DRM_DEV_DEBUG*(3 names), DRM_DEBUG*(8 names). There are thousands of these callsites, each categorized in this systematized way.
These callsites can be enabled at runtime by their category, each controlled by a bit in drm.debug (/sys/modules/drm/parameter/debug). In the current "basic" implementation, drm_debug_enabled() tests these bits in __drm_debug each time an API[1] call is executed; while cheap individually, the costs accumulate with uptime.
This patch uses dynamic-debug with (required) jump-label to patch enabled calls onto their respective NOOP slots, avoiding all runtime bit-checks of __drm_debug by drm_debug_enabled().
Dynamic debug has no concept of category, but we can emulate one by replacing enum categories with a set of prefix-strings; "drm:core:", "drm:kms:" "drm:driver:" etc, and prepend them (at compile time) to the given formats.
Then we can use: `echo module drm format "^drm:core: " +p > control`
to enable the whole category with one query.
This conversion yields many new prdbg callsites:
dyndbg: 207 debug prints in module drm_kms_helper dyndbg: 376 debug prints in module drm dyndbg: 1811 debug prints in module i915 dyndbg: 3917 debug prints in module amdgpu
Each site costs 56 bytes of .data, which is a big increase for drm modules, so CONFIG_DRM_USE_DYNAMIC_DEBUG makes it optional.
CONFIG_JUMP_LABEL is also required, to get the promised optimizations.
The "basic" -> "dyndbg" switchover is layered into the macro scheme
A. A "prefix" version of DRM_UT_<CATs> map, named DRM_DBG_CAT_<CATs>
"basic": DRM_DBG_CAT_<CATs> <=== DRM_UT_<CATs>. Identity map. "dyndbg": #define DRM_DBG_CAT_KMS "drm:kms: " #define DRM_DBG_CAT_PRIME "drm:prime: " #define DRM_DBG_CAT_ATOMIC "drm:atomic: "
In v3, had older name, DRM_DBG_CLASS_<CATs> was countered, I had agreed, but this seems better still; CATEGORY is already DRM's term-of-art, and adding a near-synonym 'CLASS' only adds ambiguity.
DRM_UT_* are preserved, since theyre used elsewhere. Since the callback maintains its state in __drm_debug, drm_debug_enabled() will stay synchronized, and continue to work. We can address them separately if they are called enough to be worth fixing.
B. drm_dev_dbg() & drm_debug() are interposed with macros
basic: forward to renamed fn, with args preserved enabled: redirect to pr_debug, dev_dbg, with CATEGORY format catenated
This is where drm_debug_enabled() is avoided. The prefix is prepended at compile-time, no category at runtime.
C. API[1] uses DRM_DBG_CAT_<CAT>s
These already use (B), now they use (A) too instead of DRM_UT_<CAT>, to get the correct token type for "basic" and "dyndbg" configs.
D. use DEFINE_DYNAMIC_DEBUG_CATEGORIES()
This defines the map using DRM_CAT_<CAT>s, and creates the /sysfs bitmap to control those categories.
CONFIG_DRM_USE_DYNAMIC_DEBUG is also used to adjust amdgpu, i915 makefiles to add -DDYNAMIC_DEBUG_MODULE; it includes the current CONFIG_DYNAMIC_DEBUG_CORE and is enabled by the user.
NOTES:
Because the dyndbg callback is keeping state in __drm_debug, it synchronizes with drm_debug_enabled() and its remaining users; the switchover should be transparent.
Code Review is expected to catch the lack of correspondence between bit=>prefix definitions (the selector) and the prefixes used in the API[1] layer above pr_debug()
I've coded the categories using the _DD_cat_() macro, which adds the ^anchor and trailing space. This excludes any sub-categories added later. This convention protects any "drm:atomic:fail:" callsites from getting stomped on by `echo 0 > debug`. Other categories could differ, but we need some default.
Dyndbg requires that the prefix be in the compiled-in format string; run-time prefixing evades callsite selection by category.
pr_debug("%s: ...", __func__, ...) // not ideal
Unfortunately __func__ is not a macro, and cannot be catenated at preprocess/compile time.
If you want that, you might consider +mfl flags instead;
Signed-off-by: Jim Cromie jim.cromie@gmail.com --- v5: . use DEFINE_DYNAMIC_DEBUG_CATEGORIES in drm_print.c . s/DRM_DBG_CLASS_/DRM_DBG_CAT_/ - dont need another term . default=y in Kconfig entry - per @DanVet . move some commit-log prose to dyndbg commit . add-prototyes to (param_get/set)_dyndbg . more wrinkles found by lkp@intel.com . relocate ratelimit chunk from elsewhere v6: . add kernel doc . fix cpp paste, drop '#' v7: . change __drm_debug to long, to fit with DEFINE_DYNAMIC_DEBUG_CATEGORIES . add -DDYNAMIC_DEBUG_MODULE to ccflags if DRM_USE_DYNAMIC_DEBUG v8: . adapt to altered ^ insertion . add mem cost numbers to kconfig . kdoc improvements (I hope) --- drivers/gpu/drm/Kconfig | 26 ++++ drivers/gpu/drm/Makefile | 3 + drivers/gpu/drm/amd/amdgpu/Makefile | 2 +- drivers/gpu/drm/drm_print.c | 53 ++++++--- drivers/gpu/drm/i915/Makefile | 2 +- include/drm/drm_print.h | 177 ++++++++++++++++++++++------ 6 files changed, 210 insertions(+), 53 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 7ff89690a976..84659310ed20 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -57,6 +57,32 @@ config DRM_DEBUG_MM
If in doubt, say "N".
+config DRM_USE_DYNAMIC_DEBUG + bool "use dynamic debug to implement drm.debug" + default y + depends on DRM + depends on DYNAMIC_DEBUG || DYNAMIC_DEBUG_CORE + depends on JUMP_LABEL + help + The "basic" drm.debug facility does a lot of unlikely + bit-field tests at runtime; while cheap individually, the + cost accumulates. DYNAMIC_DEBUG can patch pr_debug()s into + NOOP slots, in a running kernel, so avoids those bit-test + overheads, and is therefore recommended by default. + + DRM_USE_DYNAMIC_DEBUG converts "basic" to "dyndbg", this + creates many new dyndbg callsites (56 bytes each), which + significantly increases drm* module .data, so is optional. + On an x86-64 kernel, with a config derived from fedora, that + price is: + #prdbgs KiB #with DRM_USE_DYNAMIC_DEBUG=y + kernel 3079 166k + drm 1 .06k 376 21k + drm_kms_helper 207 12k + i915 167 9.3k 1811 101k + amdgpu 2339 130k 3917 220k + nouveau 3 .17k 105 ~60k + config DRM_DEBUG_SELFTEST tristate "kselftests for DRM" depends on DRM diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index a118692a6df7..1809329654b3 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -20,6 +20,9 @@ drm-y := drm_aperture.o drm_auth.o drm_cache.o \ drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \ drm_managed.o drm_vblank_work.o
+#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG +ccflags-y += -DDYNAMIC_DEBUG_MODULE +#endif drm-$(CONFIG_DRM_LEGACY) += drm_agpsupport.o drm_bufs.o drm_context.o drm_dma.o \ drm_legacy_misc.o drm_lock.o drm_memory.o drm_scatter.o \ drm_vm.o diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile index 1f084919294c..a09d56f55c31 100644 --- a/drivers/gpu/drm/amd/amdgpu/Makefile +++ b/drivers/gpu/drm/amd/amdgpu/Makefile @@ -38,7 +38,7 @@ ccflags-y := -I$(FULL_AMD_PATH)/include/asic_reg \ -I$(FULL_AMD_DISPLAY_PATH)/amdgpu_dm \ -I$(FULL_AMD_PATH)/amdkfd
-ccflags-$(CONFIG_DYNAMIC_DEBUG_CORE) += -DYNAMIC_DEBUG_MODULE +ccflags-$(CONFIG_DRM_USE_DYNAMIC_DEBUG) += -DYNAMIC_DEBUG_MODULE
amdgpu-y := amdgpu_drv.o
diff --git a/drivers/gpu/drm/drm_print.c b/drivers/gpu/drm/drm_print.c index 111b932cf2a9..2c2cc52ac72b 100644 --- a/drivers/gpu/drm/drm_print.c +++ b/drivers/gpu/drm/drm_print.c @@ -28,6 +28,7 @@ #include <stdarg.h>
#include <linux/io.h> +#include <linux/module.h> #include <linux/moduleparam.h> #include <linux/seq_file.h> #include <linux/slab.h> @@ -40,19 +41,39 @@ * __drm_debug: Enable debug output. * Bitmask of DRM_UT_x. See include/drm/drm_print.h for details. */ -unsigned int __drm_debug; +unsigned long __drm_debug; EXPORT_SYMBOL(__drm_debug);
-MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug category.\n" -"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n" -"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n" -"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n" -"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n" -"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n" -"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n" -"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n" -"\t\tBit 8 (0x100) will enable DP messages (displayport code)"); -module_param_named(debug, __drm_debug, int, 0600); +#define DRM_DEBUG_DESC \ +"Enable debug output, where each bit enables a debug category.\n" \ +"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n" \ +"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n" \ +"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n" \ +"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n" \ +"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n" \ +"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n" \ +"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n" \ +"\t\tBit 8 (0x100) will enable DP messages (displayport code)." + +#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG +#include <linux/dynamic_debug.h> +DEFINE_DYNAMIC_DEBUG_CATEGORIES(debug, __drm_debug, + DRM_DEBUG_DESC, + _DD_cat_(0, DRM_DBG_CAT_CORE), + _DD_cat_(1, DRM_DBG_CAT_DRIVER), + _DD_cat_(2, DRM_DBG_CAT_KMS), + _DD_cat_(3, DRM_DBG_CAT_PRIME), + _DD_cat_(4, DRM_DBG_CAT_ATOMIC), + _DD_cat_(5, DRM_DBG_CAT_VBL), + _DD_cat_(6, DRM_DBG_CAT_STATE), + _DD_cat_(7, DRM_DBG_CAT_LEASE), + _DD_cat_(8, DRM_DBG_CAT_DP), + _DD_cat_(9, DRM_DBG_CAT_DRMRES)); + +#else +MODULE_PARM_DESC(debug, DRM_DEBUG_DESC); +module_param_named(debug, __drm_debug, ulong, 0600); +#endif
void __drm_puts_coredump(struct drm_printer *p, const char *str) { @@ -256,8 +277,8 @@ void drm_dev_printk(const struct device *dev, const char *level, } EXPORT_SYMBOL(drm_dev_printk);
-void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, - const char *format, ...) +void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category, + const char *format, ...) { struct va_format vaf; va_list args; @@ -278,9 +299,9 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
va_end(args); } -EXPORT_SYMBOL(drm_dev_dbg); +EXPORT_SYMBOL(__drm_dev_dbg);
-void __drm_dbg(enum drm_debug_category category, const char *format, ...) +void ___drm_dbg(enum drm_debug_category category, const char *format, ...) { struct va_format vaf; va_list args; @@ -297,7 +318,7 @@ void __drm_dbg(enum drm_debug_category category, const char *format, ...)
va_end(args); } -EXPORT_SYMBOL(__drm_dbg); +EXPORT_SYMBOL(___drm_dbg);
void __drm_err(const char *format, ...) { diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 038fd29c89d4..0147e9f0394a 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -295,7 +295,7 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif
-ccflags-$(CONFIG_DYNAMIC_DEBUG_CORE) += -DDYNAMIC_DEBUG_MODULE +ccflags-$(CONFIG_DRM_USE_DYNAMIC_DEBUG) += -DDYNAMIC_DEBUG_MODULE
obj-$(CONFIG_DRM_I915) += i915.o obj-$(CONFIG_DRM_I915_GVT_KVMGT) += gvt/kvmgt.o diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h index 9b66be54dd16..4a38591a424b 100644 --- a/include/drm/drm_print.h +++ b/include/drm/drm_print.h @@ -35,7 +35,7 @@ #include <drm/drm.h>
/* Do *not* use outside of drm_print.[ch]! */ -extern unsigned int __drm_debug; +extern unsigned long __drm_debug;
/** * DOC: print @@ -252,15 +252,15 @@ static inline struct drm_printer drm_err_printer(const char *prefix) /** * enum drm_debug_category - The DRM debug categories * - * Each of the DRM debug logging macros use a specific category, and the logging - * is filtered by the drm.debug module parameter. This enum specifies the values - * for the interface. + * The drm.debug logging API[1] has 10 enumerated categories of + * messages, issued by 3 families of macros: 10 drm_dbg_<CATs>, 8 + * DRM_DEBUG_<CATs>, and 3 DRM_DEV_DEBUG_<CATs>. * * Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except * DRM_DEBUG() logs to DRM_UT_CORE. * - * Enabling verbose debug messages is done through the drm.debug parameter, each - * category being enabled by a bit: + * Enabling categories of debug messages is done through the drm.debug + * parameter, each category being enabled by a bit: * * - drm.debug=0x1 will enable CORE messages * - drm.debug=0x2 will enable DRIVER messages @@ -268,8 +268,8 @@ static inline struct drm_printer drm_err_printer(const char *prefix) * - ... * - drm.debug=0x1ff will enable all messages * - * An interesting feature is that it's possible to enable verbose logging at - * run-time by echoing the debug value in its sysfs node:: + * It's possible to enable drm.debug logging at run-time by echoing + * the debug value in its sysfs node:: * * # echo 0xf > /sys/module/drm/parameters/debug * @@ -319,6 +319,103 @@ enum drm_debug_category { DRM_UT_DRMRES = 0x200, };
+/** + * DOC: CONFIG_DRM_USE_DYNAMIC_DEBUG - using dyndbg in drm.debug + * + * In the "basic" drm.debug implementation outlined above, each time a + * drm-debug API[1] call is executed, drm_debug_enabled(cat) tests + * drm.debug vs cat before printing. + * + * DYNAMIC_DEBUG (aka: dyndbg) patches pr_debug()s in^out of the + * running kernel, so it can avoid drm_debug_enabled() and skip lots + * of unlikely bit tests. + * + * dyndbg has no concept of category, but we can prepend a + * class-prefix string: "drm:core: ", "drm:kms: ", "drm:driver: " etc, + * to pr_debug's format (at compile time). + * + * Then control the category:: + * + * # echo module drm format "^drm:core: " +p > control + * c: dynamic_debug_exec_queries("format '^drm:core: ' +p", "drm"); + * + * To do this for "basic" | "dyndbg", adaptation adds some macro indirection: + * + * 0. use dyndbg support to define the bits => prefixes map, and creates sysfs node:: + * + * DEFINE_DYNAMIC_DEBUG_CATEGORIES(debug, __drm_debug, + * "drm.debug - overview", + * { [0] = "^drm:core: " }, // note the ^anchor + * { [1] = "^drm:kms: " }, ...); + * + * 1. DRM_DBG_CAT_<CAT>:: + * + * This set of symbols replaces DRM_UT_<CAT> inside the drm-debug API; + * for "basic" it is a copy of DRM_UT_<CAT>, otherwise they are the set + * of class prefix strings used in pr_debugs (either directly or by + * macro wrappers). + * + * 2. drm_dev_dbg & drm_debug are called by drm.debug API + * + * These are now macros, either forwarding to renamed functions, or + * prepending the class string to the format, and invoking pr_debug + * directly. Since the API is all macros, dyndbg's pr_debug sees the + * actual (broad population of) callsites, and they're all + * individually controllable. + */ +#if !defined(CONFIG_DRM_USE_DYNAMIC_DEBUG) + +#define __drm_dbg(cls, fmt, ...) \ + ___drm_dbg(cls, fmt, ##__VA_ARGS__) +#define drm_dev_dbg(dev, cls, fmt, ...) \ + __drm_dev_dbg(dev, cls, fmt, ##__VA_ARGS__) + +#define DRM_DBG_CAT_CORE DRM_UT_CORE +#define DRM_DBG_CAT_DRIVER DRM_UT_DRIVER +#define DRM_DBG_CAT_KMS DRM_UT_KMS +#define DRM_DBG_CAT_PRIME DRM_UT_PRIME +#define DRM_DBG_CAT_ATOMIC DRM_UT_ATOMIC +#define DRM_DBG_CAT_VBL DRM_UT_VBL +#define DRM_DBG_CAT_STATE DRM_UT_STATE +#define DRM_DBG_CAT_LEASE DRM_UT_LEASE +#define DRM_DBG_CAT_DP DRM_UT_DP +#define DRM_DBG_CAT_DRMRES DRM_UT_DRMRES + +#else /* CONFIG_DRM_USE_DYNAMIC_DEBUG */ + +/* join prefix + format in cpp so dyndbg can see it */ +#define __drm_dbg(pfx, fmt, ...) \ + pr_debug(pfx " " fmt, ##__VA_ARGS__) +#define drm_dev_dbg(dev, pfx, fmt, ...) \ + dev_dbg(dev, pfx " " fmt, ##__VA_ARGS__) + +/** + * enum-ish DRM_DBG_CAT_<categories>:: + * + * - DRM_DBG_CAT_CORE "drm:core:" + * - DRM_DBG_CAT_DRIVER "drm:drvr:" + * - DRM_DBG_CAT_KMS "drm:kms:" + * - DRM_DBG_CAT_PRIME "drm:prime:" + * - DRM_DBG_CAT_ATOMIC "drm:atomic:" + * - DRM_DBG_CAT_VBL "drm:vbl:" + * - DRM_DBG_CAT_STATE "drm:state:" + * - DRM_DBG_CAT_LEASE "drm:lease:" + * - DRM_DBG_CAT_DP "drm:dp:" + * - DRM_DBG_CAT_DRMRES "drm:res:" + */ +#define DRM_DBG_CAT_CORE "drm:core:" +#define DRM_DBG_CAT_DRIVER "drm:drvr:" +#define DRM_DBG_CAT_KMS "drm:kms:" +#define DRM_DBG_CAT_PRIME "drm:prime:" +#define DRM_DBG_CAT_ATOMIC "drm:atomic:" +#define DRM_DBG_CAT_VBL "drm:vbl:" +#define DRM_DBG_CAT_STATE "drm:state:" +#define DRM_DBG_CAT_LEASE "drm:lease:" +#define DRM_DBG_CAT_DP "drm:dp:" +#define DRM_DBG_CAT_DRMRES "drm:res:" + +#endif /* CONFIG_DRM_USE_DYNAMIC_DEBUG */ + static inline bool drm_debug_enabled(enum drm_debug_category category) { return unlikely(__drm_debug & category); @@ -334,8 +431,8 @@ __printf(3, 4) void drm_dev_printk(const struct device *dev, const char *level, const char *format, ...); __printf(3, 4) -void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, - const char *format, ...); +void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category, + const char *format, ...);
/** * DRM_DEV_ERROR() - Error output. @@ -376,6 +473,16 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, } \ })
+/** + * DRM debug API - library of macros to issue categorized syslog messages + * + * multiple flavors:: + * - DRM_DEV_DEBUG<,_DRIVER,_KMS> + * - drm_dbg_<core,kms,prime,atomic,vbl,state,lease,dp,drmres + * - DRM_DEBUG<,_DRIVER,_KMS,_PRIME,_ATOMIC,_VBL,_LEASE,_DP> + * - DRM_DEBUG_KMS_RATELIMITED + */ + /** * DRM_DEV_DEBUG() - Debug output for generic drm code * @@ -383,7 +490,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG(dev, fmt, ...) \ - drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__) + drm_dev_dbg(dev, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__) /** * DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver * @@ -391,7 +498,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \ - drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + drm_dev_dbg(dev, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__) /** * DRM_DEV_DEBUG_KMS() - Debug output for modesetting code * @@ -399,7 +506,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \ - drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__) + drm_dev_dbg(dev, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
/* * struct drm_device based logging @@ -441,27 +548,26 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, #define drm_err_ratelimited(drm, fmt, ...) \ __drm_printk((drm), err, _ratelimited, "*ERROR* " fmt, ##__VA_ARGS__)
- #define drm_dbg_core(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_CORE, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__) #define drm_dbg(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__) #define drm_dbg_kms(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_KMS, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__) #define drm_dbg_prime(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_PRIME, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__) #define drm_dbg_atomic(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__) #define drm_dbg_vbl(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_VBL, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__) #define drm_dbg_state(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_STATE, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_STATE, fmt, ##__VA_ARGS__) #define drm_dbg_lease(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_LEASE, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__) #define drm_dbg_dp(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DP, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DP, fmt, ##__VA_ARGS__) #define drm_dbg_drmres(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRMRES, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRMRES, fmt, ##__VA_ARGS__)
/* @@ -471,7 +577,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, */
__printf(2, 3) -void __drm_dbg(enum drm_debug_category category, const char *format, ...); +void ___drm_dbg(enum drm_debug_category category, const char *format, ...); __printf(1, 2) void __drm_err(const char *format, ...);
@@ -500,29 +606,29 @@ void __drm_err(const char *format, ...); #define DRM_ERROR_RATELIMITED(fmt, ...) \ DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
-#define DRM_DEBUG(fmt, ...) \ - __drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__) +#define DRM_DEBUG(fmt, ...) \ + __drm_dbg(DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DRIVER(fmt, ...) \ - __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_KMS(fmt, ...) \ - __drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_PRIME(fmt, ...) \ - __drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_ATOMIC(fmt, ...) \ - __drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_VBL(fmt, ...) \ - __drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_LEASE(fmt, ...) \ - __drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DP(fmt, ...) \ - __drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_DP, fmt, ## __VA_ARGS__)
#define __DRM_DEFINE_DBG_RATELIMITED(category, drm, fmt, ...) \ ({ \ @@ -530,7 +636,8 @@ void __drm_err(const char *format, ...); const struct drm_device *drm_ = (drm); \ \ if (drm_debug_enabled(DRM_UT_ ## category) && __ratelimit(&rs_)) \ - drm_dev_printk(drm_ ? drm_->dev : NULL, KERN_DEBUG, fmt, ## __VA_ARGS__); \ + drm_dev_dbg((drm_) ? (drm_)->dev : NULL, \ + DRM_DBG_CAT_ ## category, fmt, ##__VA_ARGS__); \ })
#define drm_dbg_kms_ratelimited(drm, fmt, ...) \