Dear All,
On 31.03.2022 16:22, Robert Foss wrote:
On Fri, 25 Mar 2022 at 17:04, Adam Ford aford173@gmail.com wrote:
On Fri, Mar 25, 2022 at 10:00 AM Marek Szyprowski m.szyprowski@samsung.com wrote:
On 03.03.2022 17:36, Jagan Teki wrote:
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764 panel_bridge API
Patch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4: panel_bridge API
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other things and I was not able to check the display of the boards with remote access.
Finally, this patchset works properly on all my Exynos-based test systems:
Exynos4210 Trats with Samsung s6e8aa0 DSI panel
Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos
MIC bridge
I will post my acked-by and tested-by tags for each patch.
Thank you so much! I think a lot of people will celebrate when this gets approved and merged. ;-)
Applied to drm-misc-next.
Thanks for merging this. Today (once the patches landed in linux-next) I found that there is one more issue left to fix.
On the Exynos4210-based Trats board I get the following error:
# ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault
#
Surprisingly, all other boards, even Exynos4412-based Trats2 with exactly the same DSI controller and panel works fine:
# ./modetest -c -Mexynos Connectors: id encoder status name size (mm) modes encoders 71 70 connected DSI-1 58x103 1 70 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 720x1280 60 720 725 730 735 1280 1293 1295 1296 57153 flags: ; type: preferred, driver props: 1 EDID: flags: immutable blob blobs:
value: 2 DPMS: flags: enum enums: On=0 Standby=1 Suspend=2 Off=3 value: 0 5 link-status: flags: enum enums: Good=0 Bad=1 value: 0 6 non-desktop: flags: immutable range values: 0 1 value: 0 4 TILE: flags: immutable blob blobs:
value: 20 CRTC_ID: flags: object value: 54 73 0 connected HDMI-A-1 0x0 0 72 props: 1 EDID: flags: immutable blob blobs:
value: 2 DPMS: flags: enum enums: On=0 Standby=1 Suspend=2 Off=3 value: 0 5 link-status: flags: enum enums: Good=0 Bad=1 value: 0 6 non-desktop: flags: immutable range values: 0 1 value: 0 4 TILE: flags: immutable blob blobs:
value: 20 CRTC_ID: flags: object value: 0
(the only difference between Trats and Trats2 is the fact that Trats2 has also HDMI output implemented).
It looks that something is missing in the connector initialization, but I didn't dig enough into it. The emulated framebuffer is properly registered and displayed on the panel.
Best regards