The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli denis@eukrea.com --- ChangeLog v10->v11: - Now uses the drm-panel instead of the display-timings. This is to get regulator support, which is lacking in the imx-drm driver when using the display-timings.
ChangeLog v9->v10: - Rebased - Now enables the cmo-qvga regulator at boot.
ChangeLog v8->v9: - Removed the Cc. They are now set in git-send-email directly. - updated pixelclk-active after the following patch: "imx-drm: Match ipu_di_signal_cfg's clk_pol with its description."
ChangeLog v7->v8: - Rebased the patch: added the now required imx-drm node. - Adapted the svga clock-frequency value in order to still be able to display an image after the following commit: "imx-drm: ipu-v3: more inteligent DI clock selection"
ChangeLog v6->v7: - Shrinked even more the Cc list. - Since the pingrp headers were removed, the references to it where replaced by the actual pins. - Added the targets to arch/arm/boot/dts/Makefile
ChangeLog v5->v6: - Reordered the Cc list.
ChangeLog v3->v5: - Updated to new GPIO defines. - Updated to new licenses checkpatch requirements. - one whitespace cleanup.
ChangeLog v2->v3: - Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards. - This patch now only adds display support. - Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem. - rebased and reworked the dts displays addition. - Also rebased and reworked the fsl,pins usage. --- arch/arm/boot/dts/Makefile | 3 ++ .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts | 41 ++++++++++++++++ .../imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts | 28 +++++++++++ .../imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts | 28 +++++++++++ .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 49 ++++++++++++++++++++ 5 files changed, 149 insertions(+) create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2145af6..4ac8aeb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -166,6 +166,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ + imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dtb \ + imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dtb \ + imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dtb \ imx53-ard.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts new file mode 100644 index 0000000..7c280f8 --- /dev/null +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2013 Eukréa Electromatique denis@eukrea.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx51-eukrea-mbimxsd51-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD51 with the CMO-QVGA Display"; + compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51"; + + panel: panel { + compatible = "eukrea,mbimxsd51-cmo-qvga", "simple-panel"; + power-supply = <®_lcd_3v3>; + }; + + reg_lcd_3v3: lcd-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&display { + status = "okay"; + fsl,panel = <&panel>; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts new file mode 100644 index 0000000..323ebf4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts @@ -0,0 +1,28 @@ +/* + * Copyright 2013 Eukréa Electromatique denis@eukrea.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx51-eukrea-mbimxsd51-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD51 with the DVI-SVGA Display"; + compatible = "eukrea,mbimxsd51-baseboard-dvi-svga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51"; + + panel: panel { + compatible = "eukrea,mbimxsd51-dvi-svga", "simple-panel"; + }; +}; + +&display { + status = "okay"; + fsl,panel = <&panel>; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts new file mode 100644 index 0000000..f065500 --- /dev/null +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts @@ -0,0 +1,28 @@ +/* + * Copyright 2013 Eukréa Electromatique denis@eukrea.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx51-eukrea-mbimxsd51-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD51 with the DVI-VGA Display"; + compatible = "eukrea,mbimxsd51-baseboard-dvi-vga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51"; + + panel: panel { + compatible = "eukrea,mbimxsd51-dvi-vga", "simple-panel"; + }; +}; + +&display { + status = "okay"; + fsl,panel = <&panel>; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 5cec4f3..dbd1832 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -24,6 +24,20 @@ model = "Eukrea CPUIMX51"; compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+ display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + status = "disabled"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -146,6 +160,37 @@ >; };
+ pinctrl_ipu_disp1: ipudisp1grp { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 + >; + }; + pinctrl_reg_lcd_3v3: reg_lcd_3v3 { fsl,pins = < MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 @@ -154,6 +199,10 @@ }; };
+&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + &ssi2 { codec-handle = <&tlv320aic23>; fsl,mode = "i2s-slave";