[PATCH v3 13/18] arm64: dts: allwinner: a64: bananapi-m64: Enable HDMI output

Enable all necessary HDMI pipeline nodes with HDMI out connector on Bananpi-m64 board.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v3: - Enable all pipeline components Changes for v2: - none

.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 094cfed13df9..7adba2c8f6e5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; };

+ connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds";

@@ -86,6 +97,10 @@ }; };

+&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -103,6 +118,17 @@ status = "okay"; };

+&hdmi { + hvcc-supply = <&reg_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -120,6 +146,10 @@ }; };

+&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -300,6 +330,10 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;