ME FW contributes a vital role in HDCP2.2 authentication. HDCP2.2 driver needs to communicate to ME FW for each step of the HDCP2.2 authentication.
ME FW prepare and HDCP2.2 authentication parameters and encrypt them as per spec. With such parameter Driver prepares HDCP2.2 auth messages and communicate with HDCP2.2 sink.
Similarly HDCP2.2 sink's response is shared with ME FW for decrypt and verification.
Once All the steps of HDCP2.2 authentications are complete on driver's request ME FW will configure the port as authenticated and supply the HDCP keys to the Gen HW for encryption.
Only after this stage HDCP2.2 driver can start the HDCP2.2 encryption for a port.
ME FW is interfaced to kernel through MEI Bus Driver. To obtain the HDCP2.2 services from the ME FW through MEI Bus driver MEI Client Driver is developed.
v2: hdcp files are moved to drivers/misc/mei/hdcp/ [Tomas] v3: Squashed the Kbuild support [Tomas] UUID renamed and Module License is modified [Tomas] drv_data is set to null at remove [Tomas] v4: Module name is changed to "MEI HDCP" I915 Selects the MEI_HDCP v5: Remove redundant text from the License header Fix malformed licence Removed the drv_data resetting. v6: K-Doc addition. [Tomas] v7: %s/UUID_LE/GUID_INIT [Tomas] GPL Ver is 2.0 than 2.0+ [Tomas]
Signed-off-by: Ramalingam C ramalingam.c@intel.com Signed-off-by: Tomas Winkler tomas.winkler@intel.com
drivers/misc/mei/Kconfig | 7 +++++ drivers/misc/mei/Makefile | 2 ++ drivers/misc/mei/hdcp/Makefile | 7 +++++ drivers/misc/mei/hdcp/mei_hdcp.c | 65 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 81 insertions(+) create mode 100644 drivers/misc/mei/hdcp/Makefile create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.c
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig index c49e1d2269af..9c518b7f0011 100644 --- a/drivers/misc/mei/Kconfig +++ b/drivers/misc/mei/Kconfig @@ -43,3 +43,10 @@ config INTEL_MEI_TXE
Supported SoCs: Intel Bay Trail
+config INTEL_MEI_HDCP
- tristate "Intel HDCP2.2 services of ME Interface"
- select INTEL_MEI_ME
- depends on DRM_I915
- help
MEI Support for HDCP2.2 Services on Intel SoCs.
This is not limited to SoC this goes for PCH based platforms as well.
diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile index d9215fc4e499..8c2d9565a4cb 100644 --- a/drivers/misc/mei/Makefile +++ b/drivers/misc/mei/Makefile @@ -24,3 +24,5 @@ mei-txe-objs += hw-txe.o
mei-$(CONFIG_EVENT_TRACING) += mei-trace.o CFLAGS_mei-trace.o = - I$(src)
+obj-$(CONFIG_INTEL_MEI_HDCP) += hdcp/ diff --git a/drivers/misc/mei/hdcp/Makefile b/drivers/misc/mei/hdcp/Makefile new file mode 100644 index 000000000000..e27d10754dbf --- /dev/null +++ b/drivers/misc/mei/hdcp/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2017-2018, Intel Corporation. +# +# Makefile - HDCP client driver for Intel MEI Bus Driver.
+obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c new file mode 100644 index 000000000000..b8580b91e255 --- /dev/null +++ b/drivers/misc/mei/hdcp/mei_hdcp.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0) +/*
- Copyright © 2017-2018 Intel Corporation
- Mei_hdcp.c: HDCP client driver for mei bus
- Author:
- Ramalingam C ramalingam.c@intel.com */
+/**
- DOC: MEI_HDCP Client Driver
- This is a client driver to the mei_bus to make the HDCP2.2 services
+of
- ME FW available for the interested consumers like I915.
- This module will act as a translation layer between HDCP protocol
- implementor(I915) and ME FW by translating HDCP2.2 authentication
- messages to ME FW command payloads and vice versa.
- */
+#include <linux/module.h> +#include <linux/slab.h> +#include <linux/uuid.h> +#include <linux/mei_cl_bus.h>
+static int mei_hdcp_probe(struct mei_cl_device *cldev,
const struct mei_cl_device_id *id) {- int ret;
- ret = mei_cldev_enable(cldev);
- if (ret < 0)
dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret);- return ret;
+}
+static int mei_hdcp_remove(struct mei_cl_device *cldev) {
- return mei_cldev_disable(cldev);
+}
+#define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2,
I would use space instead of tab here, it's not sable view between editors.
0x4EA2, 0xA5, \
0x52, 0xD1, 0xC5, 0x4B, \0x62, 0x7F, 0x04)+static struct mei_cl_device_id mei_hdcp_tbl[] = {
- { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY },
- { }
+}; +MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl);
+static struct mei_cl_driver mei_hdcp_driver = {
- .id_table = mei_hdcp_tbl,
- .name = KBUILD_MODNAME,
- .probe = mei_hdcp_probe,
- .remove = mei_hdcp_remove,
Would use spaces here too, between structure member and assignment.
Otherwise looks good to me. Ack. Thanks Tomas