On Thu, 2017-07-27 at 15:47 +0300, Andrey Gusakov wrote:
Fields in HTIM01 and HTIM02 regs should be even. Recomended thresh_dly value is max_tu_symbol.
What about the VSDELAY change? This should be mentioned in the commit message.
Signed-off-by: Andrey Gusakov andrey.gusakov@cogentembedded.com
drivers/gpu/drm/bridge/tc358767.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 4aee6178d889..c657a00af508 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -659,6 +659,14 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode) int lower_margin = mode->vsync_start - mode->vdisplay; int vsync_len = mode->vsync_end - mode->vsync_start;
- /*
* Recommended maximum number of symbols transferred in a transfer unit:
* DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
* (output active video bandwidth in bytes))
* Must be less than tu_size.
*/
- max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
- dev_dbg(tc->dev, "set mode %dx%d\n", mode->hdisplay, mode->vdisplay); dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
@@ -668,13 +676,18 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode) dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
- /* LCD Ctl Frame Size */
- tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
- /*
* LCD Ctl Frame Size
* datasheet is not clear of vsdelay in case of DPI
* assume we do not need any delay when DPI is a source of
* sync signals
*/
- tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
VSDELAY is documented as the delay in pixel clocks between the time a VSYNC/HSYNC Start DSI packet is received and the time HSYNC/VSYNC is asserted in the DP output. I assume that this field is just ignored in DPI mode.
OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
- tc_write(HTIM01, (left_margin << 16) | /* H back porch */
(hsync_len << 0)); /* Hsync */
- tc_write(HTIM02, (right_margin << 16) | /* H front porch */
(mode->hdisplay << 0)); /* width */
- tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
(ALIGN(hsync_len, 2) << 0)); /* Hsync */
- tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) | /* H front porch */
tc_write(VTIM01, (upper_margin << 16) | /* V back porch */ (vsync_len << 0)); /* Vsync */ tc_write(VTIM02, (lower_margin << 16) | /* V front porch */(ALIGN(mode->hdisplay, 2) << 0)); /* width */
@@ -693,7 +706,7 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode) /* DP Main Stream Attributes */ vid_sync_dly = hsync_len + left_margin + mode->hdisplay; tc_write(DP0_VIDSYNCDELAY,
(0x003e << 16) | /* thresh_dly */
(max_tu_symbol << 16) | /* thresh_dly */
(vid_sync_dly << 0));
tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
@@ -709,13 +722,6 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode) tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW | DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
- /*
* Recommended maximum number of symbols transferred in a transfer unit:
* DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
* (output active video bandwidth in bytes))
* Must be less than tu_size.
*/
- max_tu_symbol = TU_SIZE_RECOMMENDED - 1; tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) | BPC_8);
Otherwise, Acked-by: Philipp Zabel p.zabel@pengutronix.de
regards Philipp