On Tue, Aug 6, 2019 at 2:25 PM Alyssa Rosenzweig alyssa.rosenzweig@collabora.com wrote:
While newer kbase include only the numbers of errata, older kbase releases included one-line descriptions for each errata, which is useful for those working on the driver. Import these descriptions. Most are from kbase verbatim; a few I edited for clarity.
A few issues pertaining to newer models are unknown as they were not added to kbase until after kbase began stripping these comments.
Signed-off-by: Alyssa Rosenzweig alyssa.rosenzweig@collabora.com
drivers/gpu/drm/panfrost/panfrost_issues.h | 80 ++++++++++++++++++++++ 1 file changed, 80 insertions(+)
A couple of nits below.
diff --git a/drivers/gpu/drm/panfrost/panfrost_issues.h b/drivers/gpu/drm/panfrost/panfrost_issues.h index cec6dcdad..af3a31539 100644 --- a/drivers/gpu/drm/panfrost/panfrost_issues.h +++ b/drivers/gpu/drm/panfrost/panfrost_issues.h @@ -13,37 +13,117 @@
- to care about.
*/ enum panfrost_hw_issue {
/* Need way to guarantee that all previously-translated memory accesses
* are commited */ HW_ISSUE_6367,
/* On job complete with non-done the cache is not flushed */ HW_ISSUE_6787,
/* Write of PRFCNT_CONFIG_MODE_MANUAL to PRFCNT_CONFIG causes a
* instrumentation dump if PRFCNT_TILER_EN is enabled */ HW_ISSUE_8186,
/* TIB: Reports faults from a vtile which has not yet been allocated */ HW_ISSUE_8245,
/* uTLB deadlock could occur when writing to an invalid page at the
* same time as access to a valid page in the same uTLB cache line ( ==
* 4 PTEs == 16K block of mapping) */ HW_ISSUE_8316,
/* HT: TERMINATE for RUN command ignored if previous LOAD_DESCRIPTOR is
* still executing */ HW_ISSUE_8394,
/* CSE: Sends a TERMINATED response for a task that should not be
* terminated */ HW_ISSUE_8401,
/* Repeatedly Soft-stopping a job chain consisting of (Vertex Shader,
* Cache Flush, Tiler) jobs causes DATA_INVALID_FAULT on tiler job. */ HW_ISSUE_8408,
/* Disable the Pause Buffer in the LS pipe. */ HW_ISSUE_8443,
/* Change in RMUs in use causes problems related with the core's SDC */ HW_ISSUE_8987,
/* Compute endpoint has a 4-deep queue of tasks, meaning a soft stop
* won't complete until all 4 tasks have completed */ HW_ISSUE_9435,
/* HT: Tiler returns TERMINATED for command that hasn't been terminated
*/
Inconsistent comment formatting on some of these like this.
HW_ISSUE_9510,
/* Occasionally the GPU will issue multiple page faults for the same
* address before the MMU page table has been read by the GPU */ HW_ISSUE_9630,
/* RA DCD load request to SDC returns invalid load ignore causing
* colour buffer mismatch */ HW_ISSUE_10327,
/* MMU TLB invalidation hazards */ HW_ISSUE_10649,
/* Missing cache flush in multi core-group configuration */ HW_ISSUE_10676,
/* Chicken bit on T72X for a hardware workaround in compiler */ HW_ISSUE_10797,
/* Soft-stopping fragment jobs might fail with TILE_RANGE_FAULT */ HW_ISSUE_10817,
/* Intermittent missing interrupt on job completion */ HW_ISSUE_10883,
/* Soft-stopping fragment jobs might fail with TILE_RANGE_ERROR
* (similar to issue 10817) and can use HW_ISSUE_10817 workaround
*/ HW_ISSUE_10959,
/* Soft-stopped fragment shader job can restart with out-of-bound
* restart index
*/ HW_ISSUE_10969,
/* Race condition can cause tile list corruption */ HW_ISSUE_11020,
/* Write buffer can cause tile list corruption */ HW_ISSUE_11024,
/* Pause buffer can cause a fragment job hang */ HW_ISSUE_11035,
/* TODO: Unknown */ HW_ISSUE_11056,
/* Clear encoder state for a hard stopped fragment job which is AFBC
* encoded by soft resetting the GPU. Only for T76X r0p0, r0p1 and
* r0p1_50rel0
*/ HW_ISSUE_T76X_3542,
/* Keep tiler module clock on to prevent GPU stall */ HW_ISSUE_T76X_3953,
/* TODO: Unknown */
This is Bifrost errata which is newer and I'm assuming will never have a description. Is there much point in any comment?
HW_ISSUE_TMIX_8463,
/* TODO: Unknown */ GPUCORE_1619,
/* TODO: Unknown */ HW_ISSUE_TMIX_8438,
/* TODO: Unknown */ HW_ISSUE_TGOX_R1_1234,
HW_ISSUE_END
};
-- 2.20.1