Re: [PATCH v4 1/2] drm: bridge: Add sii902x driver

On Mon, May 16, 2016 at 04:04:28PM +0200, Boris Brezillon wrote:

Add basic support for the sii902x RGB -> HDMI bridge. This driver does not support audio output yet.

Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Tested-by: Nicolas Ferre nicolas.ferre@atmel.com

---

Hello,

This patch is only adding basic support for the sii9022 chip. As stated in the commit log, there's no audio support, but the driver also hardcodes a lot of things (like the RGB input format to use).

Best Regards,

Boris

Changes in v4:

• make reset GPIO optional
• only support attaching to DRM devices supporting atomic updates

Changes in v3:

• fix get_modes() implementation to avoid turning the screen in power save mode
• rename the driver (sil902x -> sii902x)

Changes in v2:

• fix errors reported by the kbuild robot

---

drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/sii902x.c | 477 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 486 insertions(+) create mode 100644 drivers/gpu/drm/bridge/sii902x.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index efd94e0..a692c5b 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -40,6 +40,14 @@ config DRM_PARADE_PS8622 ---help--- Parade eDP-LVDS bridge chip driver.

+config DRM_SII902X

• tristate "Silicon Image sii902x RGB/HDMI bridge"
• depends on OF
• select DRM_KMS_HELPER
• select REGMAP_I2C
• ---help---

•  Silicon Image sii902x bridge chip driver.
  

source "drivers/gpu/drm/bridge/analogix/Kconfig"

endmenu diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index ff821f4..b2a37e8 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o +obj-$(CONFIG_DRM_SII902X) += sii902x.o obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c new file mode 100644 index 0000000..76ad73a --- /dev/null +++ b/drivers/gpu/drm/bridge/sii902x.c @@ -0,0 +1,477 @@ +/*

• • Copyright (C) 2014 Atmel

• •       Bo Shen <voice.shen@atmel.com>
    

• • Authors: Bo Shen voice.shen@atmel.com

• •       Boris Brezillon <boris.brezillon@free-electrons.com>
    

• •       Wu, Songjun <Songjun.Wu@atmel.com>
    

• • Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License as published by
• • the Free Software Foundation; either version 2 of the License, or
• • (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• */

+#include <linux/component.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h>

+#include <drm/drmP.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_encoder_slave.h>

+#define SIL902X_TPI_VIDEO_DATA 0x0

+#define SIL902X_TPI_PIXEL_REPETITION 0x8 +#define SIL902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5) +#define SIL902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4) +#define SIL902X_TPI_AVI_PIXEL_REP_4X 3 +#define SIL902X_TPI_AVI_PIXEL_REP_2X 1 +#define SIL902X_TPI_AVI_PIXEL_REP_NONE 0 +#define SIL902X_TPI_CLK_RATIO_HALF (0 << 6) +#define SIL902X_TPI_CLK_RATIO_1X (1 << 6) +#define SIL902X_TPI_CLK_RATIO_2X (2 << 6) +#define SIL902X_TPI_CLK_RATIO_4X (3 << 6)

+#define SIL902X_TPI_AVI_IN_FORMAT 0x9 +#define SIL902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7) +#define SIL902X_TPI_AVI_INPUT_DITHER BIT(6) +#define SIL902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2) +#define SIL902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2) +#define SIL902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0)

+#define SIL902X_TPI_AVI_INFOFRAME 0x0c

+#define SIL902X_SYS_CTRL_DATA 0x1a +#define SIL902X_SYS_CTRL_PWR_DWN BIT(4) +#define SIL902X_SYS_CTRL_AV_MUTE BIT(3) +#define SIL902X_SYS_CTRL_DDC_BUS_REQ BIT(2) +#define SIL902X_SYS_CTRL_DDC_BUS_GRTD BIT(1) +#define SIL902X_SYS_CTRL_OUTPUT_MODE BIT(0) +#define SIL902X_SYS_CTRL_OUTPUT_HDMI 1 +#define SIL902X_SYS_CTRL_OUTPUT_DVI 0

+#define SIL902X_REG_CHIPID(n) (0x1b + (n))

+#define SIL902X_PWR_STATE_CTRL 0x1e +#define SIL902X_AVI_POWER_STATE_MSK GENMASK(1, 0) +#define SIL902X_AVI_POWER_STATE_D(l) ((l) & SIL902X_AVI_POWER_STATE_MSK)

+#define SI902X_INT_ENABLE 0x3c +#define SI902X_INT_STATUS 0x3d +#define SI902X_HOTPLUG_EVENT BIT(0) +#define SI902X_PLUGGED_STATUS BIT(2)

+#define SIL902X_REG_TPI_RQB 0xc7

+struct sii902x {

• struct i2c_client *i2c;
• struct regmap *regmap;
• struct drm_bridge bridge;
• struct drm_connector connector;
• struct gpio_desc *reset_gpio;
• struct work_struct hotplug_work;

+};

+static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge) +{

• return container_of(bridge, struct sii902x, bridge);

+}

+static inline struct sii902x *connector_to_sii902x(struct drm_connector *con) +{

• return container_of(con, struct sii902x, connector);

+}

+static void sii902x_reset(struct sii902x *sii902x) +{

• if (!sii902x->reset_gpio)

• return;
  

• gpiod_set_value(sii902x->reset_gpio, 1);
• msleep(100);
• gpiod_set_value(sii902x->reset_gpio, 0);

+}

+static void sii902x_connector_destroy(struct drm_connector *connector) +{

• drm_connector_unregister(connector);
• drm_connector_cleanup(connector);

+}

+static enum drm_connector_status +sii902x_connector_detect(struct drm_connector *connector, bool force) +{

• struct sii902x *sii902x = connector_to_sii902x(connector);
• unsigned int status;
• regmap_read(sii902x->regmap, SI902X_INT_STATUS, &status);
• return (status & SI902X_PLUGGED_STATUS) ?

•       connector_status_connected : connector_status_disconnected;
  

+}

+static const struct drm_connector_funcs sii902x_connector_funcs = {

• .dpms = drm_atomic_helper_connector_dpms,
• .detect = sii902x_connector_detect,
• .fill_modes = drm_helper_probe_single_connector_modes,
• .destroy = sii902x_connector_destroy,
• .reset = drm_atomic_helper_connector_reset,
• .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
• .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,

+};

+static int sii902x_get_modes(struct drm_connector *connector) +{

• struct sii902x *sii902x = connector_to_sii902x(connector);
• struct regmap *regmap = sii902x->regmap;
• u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
• unsigned int status;
• struct edid *edid;
• int num = 0;
• int ret;
• int i;
• ret = regmap_update_bits(regmap, SIL902X_SYS_CTRL_DATA,

• 		 SIL902X_SYS_CTRL_DDC_BUS_REQ,
  

• 		 SIL902X_SYS_CTRL_DDC_BUS_REQ);
  

• if (ret)

• return ret;
  

• i = 0;
• do {

• ret = regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status);
  

• if (ret)
  

• 	return ret;
  

• i++;
  

• } while (!(status & SIL902X_SYS_CTRL_DDC_BUS_GRTD));
• ret = regmap_write(regmap, SIL902X_SYS_CTRL_DATA, status);
• if (ret)

• return ret;
  

• edid = drm_get_edid(connector, sii902x->i2c->adapter);
• drm_mode_connector_update_edid_property(connector, edid);
• if (edid) {

• num += drm_add_edid_modes(connector, edid);
  

• kfree(edid);
  

• }
• ret = drm_display_info_set_bus_formats(&connector->display_info,

• 			       &bus_format, 1);
  

• if (ret)

• return ret;
  

• regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status);
• if (ret)

• return ret;
  

• ret = regmap_update_bits(regmap, SIL902X_SYS_CTRL_DATA,

• 		 SIL902X_SYS_CTRL_DDC_BUS_REQ |
  

• 		 SIL902X_SYS_CTRL_DDC_BUS_GRTD, 0);
  

• if (ret)

• return ret;
  

• i = 0;
• do {

• ret = regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status);
  

• if (ret)
  

• 	return ret;
  

• i++;
  

• } while (status & (SIL902X_SYS_CTRL_DDC_BUS_REQ |

• 	   SIL902X_SYS_CTRL_DDC_BUS_GRTD));
  

• return num;

+}

+static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,

• 			       struct drm_display_mode *mode)
  

+{

• /* TODO: check mode */
• return MODE_OK;

+}

+static struct drm_encoder *sii902x_best_encoder(struct drm_connector *connector) +{

• struct sii902x *sii902x = connector_to_sii902x(connector);
• return sii902x->bridge.encoder;

+}

drm_atomic_helper_best_encoder should do exactly this for you. If you feel board pimp the atomic helpers to call that one by default to even remove the vfunc assingment line ;-) -Daniel

+static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {

• .get_modes = sii902x_get_modes,
• .mode_valid = sii902x_mode_valid,
• .best_encoder = sii902x_best_encoder,

+};

+static void sii902x_bridge_disable(struct drm_bridge *bridge) +{

• struct sii902x *sii902x = bridge_to_sii902x(bridge);
• regmap_update_bits(sii902x->regmap, SIL902X_SYS_CTRL_DATA,

• 	   SIL902X_SYS_CTRL_PWR_DWN,
  

• 	   SIL902X_SYS_CTRL_PWR_DWN);
  

+}

+static void sii902x_bridge_enable(struct drm_bridge *bridge) +{

• struct sii902x *sii902x = bridge_to_sii902x(bridge);
• regmap_update_bits(sii902x->regmap, SIL902X_PWR_STATE_CTRL,

• 	   SIL902X_AVI_POWER_STATE_MSK,
  

• 	   SIL902X_AVI_POWER_STATE_D(0));
  

• regmap_update_bits(sii902x->regmap, SIL902X_SYS_CTRL_DATA,

• 	   SIL902X_SYS_CTRL_PWR_DWN, 0);
  

+}

+static void sii902x_bridge_mode_set(struct drm_bridge *bridge,

• 		    struct drm_display_mode *mode,
  

• 		    struct drm_display_mode *adj)
  

+{

• u8 buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
• struct sii902x *sii902x = bridge_to_sii902x(bridge);
• struct regmap *regmap = sii902x->regmap;
• struct hdmi_avi_infoframe frame;
• int ret;
• buf[0] = adj->clock;
• buf[1] = adj->clock >> 8;
• buf[2] = adj->vrefresh;
• buf[3] = 0x00;
• buf[4] = adj->hdisplay;
• buf[5] = adj->hdisplay >> 8;
• buf[6] = adj->vdisplay;
• buf[7] = adj->vdisplay >> 8;
• buf[8] = SIL902X_TPI_CLK_RATIO_1X | SIL902X_TPI_AVI_PIXEL_REP_NONE |

•  SIL902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
  

• buf[9] = SIL902X_TPI_AVI_INPUT_RANGE_AUTO |

•  SIL902X_TPI_AVI_INPUT_COLORSPACE_RGB;
  

• ret = regmap_bulk_write(regmap, SIL902X_TPI_VIDEO_DATA, buf, 10);
• if (ret)

• return;
  

• ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj);
• if (ret < 0) {

• DRM_ERROR("couldn't fill AVI infoframe\n");
  

• return;
  

• }
• ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
• if (ret < 0) {

• DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
  

• return;
  

• }
• /* Do not send the infoframe header, but keep the CRC field. */
• regmap_bulk_write(regmap, SIL902X_TPI_AVI_INFOFRAME,

• 	  buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
  

• 	  HDMI_AVI_INFOFRAME_SIZE + 1);
  

+}

+static int sii902x_bridge_attach(struct drm_bridge *bridge) +{

• struct sii902x *sii902x = bridge_to_sii902x(bridge);
• struct drm_device *drm = bridge->dev;
• int ret;
• drm_connector_helper_add(&sii902x->connector,

• 		 &sii902x_connector_helper_funcs);
  

• if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {

• dev_err(&sii902x->i2c->dev,
  

• 	"sii902x driver is only compatible with DRM device supporting atomic updates");
  

• return -ENOTSUPP;
  

• }
• ret = drm_connector_init(drm, &sii902x->connector,

• 		 &sii902x_connector_funcs,
  

• 		 DRM_MODE_CONNECTOR_HDMIA);
  

• if (ret)

• return ret;
  

• if (sii902x->i2c->irq > 0)

• sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
  

• else

• sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
  

• drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder);
• return 0;

+}

+static void sii902x_bridge_nop(struct drm_bridge *bridge) +{ +}

+static const struct drm_bridge_funcs sii902x_bridge_funcs = {

• .attach = sii902x_bridge_attach,
• .mode_set = sii902x_bridge_mode_set,
• .disable = sii902x_bridge_disable,
• .post_disable = sii902x_bridge_nop,
• .pre_enable = sii902x_bridge_nop,
• .enable = sii902x_bridge_enable,

+};

+static const struct regmap_range sii902x_volatile_ranges[] = {

• { .range_min = 0, .range_max = 0xff },

+};

+static const struct regmap_access_table sii902x_volatile_table = {

• .yes_ranges = sii902x_volatile_ranges,
• .n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),

+};

+static const struct regmap_config sii902x_regmap_config = {

• .reg_bits = 8,
• .val_bits = 8,
• .volatile_table = &sii902x_volatile_table,
• .cache_type = REGCACHE_NONE,

+};

+static irqreturn_t sii902x_interrupt(int irq, void *data) +{

• struct sii902x *sii902x = data;
• unsigned int status = 0;
• regmap_read(sii902x->regmap, SI902X_INT_STATUS, &status);
• regmap_write(sii902x->regmap, SI902X_INT_STATUS, status);
• if ((status & SI902X_HOTPLUG_EVENT) && sii902x->bridge.dev)

• drm_helper_hpd_irq_event(sii902x->bridge.dev);
  

• return IRQ_HANDLED;

+}

+static int sii902x_probe(struct i2c_client *client,

• 	 const struct i2c_device_id *id)
  

+{

• struct device *dev = &client->dev;
• unsigned int status = 0;
• struct sii902x *sii902x;
• u8 chipid[4];
• int ret;
• sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
• if (!sii902x)

• return -ENOMEM;
  

• sii902x->i2c = client;
• sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
• if (IS_ERR(sii902x->regmap))

• return PTR_ERR(sii902x->regmap);
  

• sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",

• 				      GPIOD_OUT_LOW);
  

• if (IS_ERR(sii902x->reset_gpio))

• dev_warn(dev, "Failed to retrieve/request reset gpio: %ld\n",
  

• 	 PTR_ERR(sii902x->reset_gpio));
  

• sii902x_reset(sii902x);
• ret = regmap_write(sii902x->regmap, SIL902X_REG_TPI_RQB, 0x0);
• if (ret)

• return ret;
  

• ret = regmap_bulk_read(sii902x->regmap, SIL902X_REG_CHIPID(0),

• 	       &chipid, 4);
  

• if (ret) {

• dev_err(dev, "regmap_read failed %d\n", ret);
  

• return ret;
  

• }
• if (chipid[0] != 0xb0) {

• dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
  

• 	chipid[0]);
  

• return -EINVAL;
  

• }
• /* Clear all pending interrupts */
• regmap_read(sii902x->regmap, SI902X_INT_STATUS, &status);
• regmap_write(sii902x->regmap, SI902X_INT_STATUS, status);
• if (client->irq > 0) {

• regmap_write(sii902x->regmap, SI902X_INT_ENABLE,
  

• 	     SI902X_HOTPLUG_EVENT);
  

• ret = devm_request_threaded_irq(dev, client->irq, NULL,
  

• 				sii902x_interrupt,
  

• 				IRQF_ONESHOT, dev_name(dev),
  

• 				sii902x);
  

• if (ret)
  

• 	return ret;
  

• }
• sii902x->bridge.funcs = &sii902x_bridge_funcs;
• sii902x->bridge.of_node = dev->of_node;
• ret = drm_bridge_add(&sii902x->bridge);
• if (ret) {

• dev_err(dev, "Failed to add drm_bridge\n");
  

• return ret;
  

• }
• i2c_set_clientdata(client, sii902x);
• return 0;

+}

+static int sii902x_remove(struct i2c_client *client)

+{

• struct sii902x *sii902x = i2c_get_clientdata(client);
• drm_bridge_remove(&sii902x->bridge);
• return 0;

+}

+#ifdef CONFIG_OF +static const struct of_device_id sii902x_dt_ids[] = {

• { .compatible = "sil,sii9022", },
• { }

+}; +MODULE_DEVICE_TABLE(of, sii902x_dt_ids); +#endif

+static const struct i2c_device_id sii902x_i2c_ids[] = {

• { "sii9022", 0 },
• { },

+}; +MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);

+static struct i2c_driver sii902x_driver = {

• .probe = sii902x_probe,
• .remove = sii902x_remove,
• .driver = {

• .name = "sii902x",
  

• .of_match_table = of_match_ptr(sii902x_dt_ids),
  

• },
• .id_table = sii902x_i2c_ids,

+}; +module_i2c_driver(sii902x_driver);

+MODULE_AUTHOR("Boris Brezillon boris.brezillon@free-electrons.com"); +MODULE_DESCRIPTION("SIL902x RGB -> HDMI bridges");

+MODULE_LICENSE("GPL");

2.7.4