Hi guys,
I'm writing a DRM driver for a framebuffer embedded hardware that uses an i2c encoder (adv7511), following the basic steps suggested by Laurent in "anatomy of an embedded KMS driver": https://www.youtube.com/watch?v=Ja8fM7rTae4
After initiliazing all kms, crtc, encoder, i2c, connector functions and structures i'm calling drm_fbdev_cma_init to create a fbdev.
When booting i'm getting an error message saying "No connectors reported connected with modes", but the driver init is ok and i can find the /dev/dri/* and /dev/fb0 devices.
Any clue what i might be missing during the driver load?
Thanks...
Regards, C.Palminha
--- boot log snippet --- [drm] Initialized drm 1.1.0 20060810 drm-arcpgu e0017000.pgu: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm-arcpgu e0017000.pgu: fb0: frame buffer device [drm] Initialized drm-arcpgu 1.0.0 20151127 on minor 0 --- boot log snippet ---