Set the sensor full frame based on whether the passed in mbus_fmt is 720x480 (NTSC) or 720x576 (PAL).
Signed-off-by: Steve Longerbeam steve_longerbeam@mentor.com
---
v3: no changes v2: no changes --- drivers/gpu/ipu-v3/ipu-csi.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index 06631ac..641ed76 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -365,10 +365,14 @@ int ipu_csi_init_interface(struct ipu_csi *csi, { struct ipu_csi_bus_config cfg; unsigned long flags; - u32 data = 0; + u32 width, height, data = 0;
fill_csi_bus_cfg(&cfg, mbus_cfg, mbus_fmt);
+ /* set default sensor frame width and height */ + width = mbus_fmt->width; + height = mbus_fmt->height; + /* Set the CSI_SENS_CONF register remaining fields */ data |= cfg.data_width << CSI_SENS_CONF_DATA_WIDTH_SHIFT | cfg.data_fmt << CSI_SENS_CONF_DATA_FMT_SHIFT | @@ -386,11 +390,6 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
ipu_csi_write(csi, data, CSI_SENS_CONF);
- /* Setup sensor frame size */ - ipu_csi_write(csi, - (mbus_fmt->width - 1) | ((mbus_fmt->height - 1) << 16), - CSI_SENS_FRM_SIZE); - /* Set CCIR registers */
switch (cfg.clk_mode) { @@ -408,11 +407,12 @@ int ipu_csi_init_interface(struct ipu_csi *csi, * Field1BlankEnd = 0x7, Field1BlankStart = 0x3, * Field1ActiveEnd = 0x5, Field1ActiveStart = 0x1 */ + height = 625; /* framelines for PAL */ + ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN, CSI_CCIR_CODE_1); ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2); ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3); - } else if (mbus_fmt->width == 720 && mbus_fmt->height == 480) { /* * NTSC case @@ -422,6 +422,8 @@ int ipu_csi_init_interface(struct ipu_csi *csi, * Field1BlankEnd = 0x6, Field1BlankStart = 0x2, * Field1ActiveEnd = 0x4, Field1ActiveStart = 0 */ + height = 525; /* framelines for NTSC */ + ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN, CSI_CCIR_CODE_1); ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2); @@ -447,6 +449,10 @@ int ipu_csi_init_interface(struct ipu_csi *csi, break; }
+ /* Setup sensor frame size */ + ipu_csi_write(csi, (width - 1) | ((height - 1) << 16), + CSI_SENS_FRM_SIZE); + dev_dbg(csi->ipu->dev, "CSI_SENS_CONF = 0x%08X\n", ipu_csi_read(csi, CSI_SENS_CONF)); dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE = 0x%08X\n",