This patch adds a binding that describes the cdn DP controller for rk3399.
Signed-off-by: Chris Zhong zyw@rock-chips.com
---
Changes in v1: - add extcon node description - add #sound-dai-cells description
.../bindings/display/rockchip/cdn-dp-rockchip.txt | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt new file mode 100644 index 0000000..4a66fc3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt @@ -0,0 +1,62 @@ +Rockchip RK3399 specific extensions to the cdn Display Port +================================ + +Required properties: +- compatible: must be "rockchip,cdn-dp" + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + +- clock-names: from common clock binding: + Required elements: "core_clk" "pclk" "spdif" + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: contain a port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + contained 2 endpoints, connecting to the output of vop. + +- phys: from general PHY binding: the phandle for the PHY device. + +- extcon: extcon specifier for the Power Delivery + +- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF + +------------------------------------------------------------------------------- + +Example: + cdn_dp: dp@fec00000 { + compatible = "rockchip,cdn-dp"; + reg = <0x0 0xfec00000 0x0 0x100000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, + <&cru SCLK_SPDIF_REC_DPTX>; + clock-names = "core_clk", "pclk", "spdif"; + phys = <&tcphy0>; + extcon = <&fusb1>; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dp_in: port { + #address-cells = <1>; + #size-cells = <0>; + dp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dp>; + }; + + dp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dp>; + }; + }; + }; + };