Hello,
This patch set adds support for the HDMI output port present on the Renesas Koelsch board. Doing so requires two components, a driver for the external ADV7511W HDMI encoder, and support for HDMI encoders in the DU driver.
The HDMI encoder drivers uses the DRM slave encoder framework and the component framework to communicate with the DU driver. The DT bindings are based on the OF graph bindings to link the display controller and encoder.
The first two patches have been taken from Philipp Zabel's "[PATCH v3 0/8] Add of-graph helpers to loop over endpoints and find ports by id" series. Philipp, I don't see that series in linux-next, what's the merge status ?
The R-Car DU patches start with a bit of refactoring, to finally add HDMI support in patch 08/12.
The new adv7511 driver (patch 11/12) depends on decoupling EDID parsing from the DDC I2C adapter (patch 09/12). It supports DT instantiation only (bindings are documented in patch 10/12) for now. Platform data support could be added later if needed. The code is based on Lars-Peter Clausen's adv7511 driver, with heavy modifications.
The last patch instantiates the HDMI encoder in the Koelsch board DT file and connects it to the DU output.
The patch series depends on R-Car DU DT support (scheduled for merge in v3.18-rc1) and on Koelsch DU DT enablement (hopefully scheduled for merge in v3.19-rc1). For ease of testing and review I've pushed this series and its dependencies to a git branch on
git://linuxtv.org/pinchartl/fbdev.git drm/du/adv7511
Cc: Philipp Zabel p.zabel@pengutronix.de Cc: devicetree@vger.kernel.org
Lars-Peter Clausen (2): drm: Decouple EDID parsing from I2C adapter drm: Add adv7511 encoder driver
Laurent Pinchart (8): drm: rcar-du: Remove platform data support drm: rcar-du: Use for_each_endpoint_of_node() drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init() drm: rcar-du: Replace direct DRM encoder access with cast macro drm: rcar-du: Replace drm_encoder with drm_slave_encoder drm: rcar-du: Add HDMI encoder and connector support video: Add ADV751[13] DT bindings documentation ARM: shmobile: koelsch: Add DU HDMI output support
Philipp Zabel (2): of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint of: Add for_each_endpoint_of_node helper macro
.../devicetree/bindings/video/adi,adv7511.txt | 87 ++ arch/arm/boot/dts/r8a7791-koelsch.dts | 50 +- drivers/gpu/drm/drm_edid.c | 26 +- drivers/gpu/drm/i2c/Kconfig | 6 + drivers/gpu/drm/i2c/Makefile | 2 + drivers/gpu/drm/i2c/adv7511.c | 1007 ++++++++++++++++++++ drivers/gpu/drm/i2c/adv7511.h | 289 ++++++ drivers/gpu/drm/rcar-du/Kconfig | 11 +- drivers/gpu/drm/rcar-du/Makefile | 2 + drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 10 +- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 4 +- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 2 - drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 45 +- drivers/gpu/drm/rcar-du/rcar_du_encoder.h | 23 +- drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c | 118 +++ drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h | 31 + drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c | 151 +++ drivers/gpu/drm/rcar-du/rcar_du_hdmienc.h | 35 + drivers/gpu/drm/rcar-du/rcar_du_kms.c | 65 +- drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c | 31 +- drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h | 2 - drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h | 1 - drivers/gpu/drm/rcar-du/rcar_du_vgacon.c | 5 +- drivers/of/base.c | 9 +- include/drm/drm_edid.h | 4 + include/linux/of_graph.h | 11 + include/linux/platform_data/rcar-du.h | 74 -- 27 files changed, 1902 insertions(+), 199 deletions(-) create mode 100644 Documentation/devicetree/bindings/video/adi,adv7511.txt create mode 100644 drivers/gpu/drm/i2c/adv7511.c create mode 100644 drivers/gpu/drm/i2c/adv7511.h create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmienc.h delete mode 100644 include/linux/platform_data/rcar-du.h