From: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
In preparation for adding PHY operations to handle RX SENSE and HPD, group all the PHY interrupt setup code in a single location and extract it to a separate function.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Reviewed-by: Jose Abreu joabreu@synopsys.com [narmstrong: renamed dw_hdmi_fb_registered to dw_hdmi_setup_i2c] Reviewed-by: Archit Taneja architt@codeaurora.org Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 51 ++++++++++++++----------------- 1 file changed, 23 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 32f02e9..ff1fae3 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -1558,8 +1558,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode) return 0; }
-/* Wait until we are registered to enable interrupts */ -static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi) +static void dw_hdmi_setup_i2c(struct dw_hdmi *hdmi) { hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL, HDMI_PHY_I2CM_INT_ADDR); @@ -1567,15 +1566,6 @@ static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi) hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL | HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL, HDMI_PHY_I2CM_CTLINT_ADDR); - - /* enable cable hot plug irq */ - hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); - - /* Clear Hotplug interrupts */ - hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, - HDMI_IH_PHY_STAT0); - - return 0; }
static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi) @@ -1693,6 +1683,26 @@ static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi) hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); }
+static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi) +{ + /* + * Configure the PHY RX SENSE and HPD interrupts polarities and clear + * any pending interrupt. + */ + hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0); + hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, + HDMI_IH_PHY_STAT0); + + /* Enable cable hot plug irq. */ + hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); + + /* Clear and unmute interrupts. */ + hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, + HDMI_IH_PHY_STAT0); + hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE), + HDMI_IH_MUTE_PHY_STAT0); +} + static enum drm_connector_status dw_hdmi_connector_detect(struct drm_connector *connector, bool force) { @@ -2204,29 +2214,14 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi) hdmi->ddc = NULL; }
- /* - * Configure registers related to HDMI interrupt - * generation before registering IRQ. - */ - hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0); - - /* Clear Hotplug interrupts */ - hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, - HDMI_IH_PHY_STAT0); - hdmi->bridge.driver_private = hdmi; hdmi->bridge.funcs = &dw_hdmi_bridge_funcs; #ifdef CONFIG_OF hdmi->bridge.of_node = pdev->dev.of_node; #endif
- ret = dw_hdmi_fb_registered(hdmi); - if (ret) - goto err_iahb; - - /* Unmute interrupts */ - hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE), - HDMI_IH_MUTE_PHY_STAT0); + dw_hdmi_setup_i2c(hdmi); + dw_hdmi_phy_setup_hpd(hdmi);
memset(&pdevinfo, 0, sizeof(pdevinfo)); pdevinfo.parent = dev;