Convert the STM32 display binding to DT schema format using json-schema. Split the original bindings in two yaml files: - one for display controller (ltdc) - one for DSI controller
Signed-off-by: Benjamin Gaignard benjamin.gaignard@st.com --- changes in v4: - describe interruptions items - remove unit address from port property - remove dma-ranges (DT patches send too)
changes in v3: - use (GPL-2.0-only OR BSD-2-Clause) license
changes in v2: - use BSD-2-Clause license - add panel property - fix identation - remove pinctrl-names: true - remove pinctrl-[0-9]+: true - rework ports block to include port@0 and port@1 - use const for #adress-cells and #size-cells - add additionalProperties: false .../devicetree/bindings/display/st,stm32-dsi.yaml | 151 +++++++++++++++++++++ .../devicetree/bindings/display/st,stm32-ltdc.txt | 144 -------------------- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 81 +++++++++++ 3 files changed, 232 insertions(+), 144 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/st,stm32-dsi.yaml delete mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml new file mode 100644 index 000000000000..a99532b38589 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DSI host controller + +maintainers: + - Philippe Cornu philippe.cornu@st.com + - Yannick Fertre yannick.fertre@st.com + +description: + The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller. + +properties: + compatible: + const: st,stm32-dsi + + reg: + maxItems: 1 + + clocks: + items: + - description: Module Clock + - description: DSI bus clock + - description: Pixel clock + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: pclk + - const: ref + - const: px_clk + minItems: 2 + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + items: + - const: apb + + phy-dsi-supply: + maxItems: 1 + description: + Phandle of the regulator that provides the supply voltage. + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: + DSI input port node, connected to the ltdc rgb output port. + + port@1: + type: object + description: + DSI output port node, connected to a panel or a bridge input port" + +patternProperties: + "^(panel|panel-dsi)@[0-9]$": + type: object + description: + A node containing the panel or bridge description as documented in + Documentation/devicetree/bindings/display/mipi-dsi-bus.txt + properties: + port: + type: object + description: + Panel or bridge port node, connected to the DSI output port (port@1) + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + #include <dt-bindings/gpio/gpio.h> + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + phy-dsi-supply = <®18>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... + + diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt deleted file mode 100644 index 60c54da4e526..000000000000 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ /dev/null @@ -1,144 +0,0 @@ -* STMicroelectronics STM32 lcd-tft display controller - -- ltdc: lcd-tft display controller host - Required properties: - - compatible: "st,stm32-ltdc" - - reg: Physical base address of the IP registers and length of memory mapped region. - - clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. - - clock-names: A list of clock names. For ltdc it should contain: - - "lcd" for the clock feeding the output pixel clock & IP clock. - - resets: reset to be used by the device (defined by use of RCC macro). - Required nodes: - - Video port for DPI RGB output: ltdc has one video port with up to 2 - endpoints: - - for external dpi rgb panel or bridge, using gpios. - - for internal dpi input of the MIPI DSI host controller. - Note: These 2 endpoints cannot be activated simultaneously. - -* STMicroelectronics STM32 DSI controller specific extensions to Synopsys - DesignWare MIPI DSI host controller - -The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI -DSI host controller. For all mandatory properties & nodes, please refer -to the related documentation in [5]. - -Mandatory properties specific to STM32 DSI: -- #address-cells: Should be <1>. -- #size-cells: Should be <0>. -- compatible: "st,stm32-dsi". -- clock-names: - - phy pll reference clock string name, must be "ref". -- resets: see [5]. -- reset-names: see [5]. - -Mandatory nodes specific to STM32 DSI: -- ports: A node containing DSI input & output port nodes with endpoint - definitions as documented in [3] & [4]. - - port@0: DSI input port node, connected to the ltdc rgb output port. - - port@1: DSI output port node, connected to a panel or a bridge input port. -- panel or bridge node: A node containing the panel or bridge description as - documented in [6]. - - port: panel or bridge port node, connected to the DSI output port (port@1). -Optional properties: -- phy-dsi-supply: phandle of the regulator that provides the supply voltage. - -Note: You can find more documentation in the following references -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/reset/reset.txt -[3] Documentation/devicetree/bindings/media/video-interfaces.txt -[4] Documentation/devicetree/bindings/graph.txt -[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt -[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt - -Example 1: RGB panel -/ { - ... - soc { - ... - ltdc: display-controller@40016800 { - compatible = "st,stm32-ltdc"; - reg = <0x40016800 0x200>; - interrupts = <88>, <89>; - resets = <&rcc STM32F4_APB2_RESET(LTDC)>; - clocks = <&rcc 1 CLK_LCD>; - clock-names = "lcd"; - - port { - ltdc_out_rgb: endpoint { - }; - }; - }; - }; -}; - -Example 2: DSI panel - -/ { - ... - soc { - ... - ltdc: display-controller@40016800 { - compatible = "st,stm32-ltdc"; - reg = <0x40016800 0x200>; - interrupts = <88>, <89>; - resets = <&rcc STM32F4_APB2_RESET(LTDC)>; - clocks = <&rcc 1 CLK_LCD>; - clock-names = "lcd"; - - port { - ltdc_out_dsi: endpoint { - remote-endpoint = <&dsi_in>; - }; - }; - }; - - - dsi: dsi@40016c00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-dsi"; - reg = <0x40016c00 0x800>; - clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; - clock-names = "pclk", "ref"; - resets = <&rcc STM32F4_APB2_RESET(DSI)>; - reset-names = "apb"; - phy-dsi-supply = <®18>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi_in: endpoint { - remote-endpoint = <<dc_out_dsi>; - }; - }; - - port@1 { - reg = <1>; - dsi_out: endpoint { - remote-endpoint = <&dsi_in_panel>; - }; - }; - - }; - - panel-dsi@0 { - reg = <0>; /* dsi virtual channel (0..3) */ - compatible = ...; - enable-gpios = ...; - - port { - dsi_in_panel: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - - }; - - }; - - }; -}; diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml new file mode 100644 index 000000000000..a40197ab281e --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 lcd-tft display controller + +maintainers: + - Philippe Cornu philippe.cornu@st.com + - Yannick Fertre yannick.fertre@st.com + +properties: + compatible: + const: st,stm32-ltdc + + reg: + maxItems: 1 + + interrupts: + items: + - description: events interrupt line. + - description: errors interrupt line. + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: lcd + + resets: + maxItems: 1 + + port: + type: object + description: + "Video port for DPI RGB output. + ltdc has one video port with up to 2 endpoints: + - for external dpi rgb panel or bridge, using gpios. + - for internal dpi input of the MIPI DSI host controller. + Note: These 2 endpoints cannot be activated simultaneously. + Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt." + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&rcc LTDC_R>; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + +... +