The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and UV_OFFSET), are not correct. The height component to the offset was calculated as:
(pix->width * y / 4)
But this does not produce correct offsets for odd values of y (luma line #). The luma line # must be decimated by two to produce the correct U/V line #, so the correct formula is:
(pix->width * (y / 2) / 2)
Signed-off-by: Steve Longerbeam steve_longerbeam@mentor.com --- drivers/gpu/ipu-v3/ipu-cpmem.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c index 9f2d9ec..e68e473 100644 --- a/drivers/gpu/ipu-v3/ipu-cpmem.c +++ b/drivers/gpu/ipu-v3/ipu-cpmem.c @@ -530,17 +530,17 @@ static const struct ipu_rgb def_bgra_16 = {
#define Y_OFFSET(pix, x, y) ((x) + pix->width * (y)) #define U_OFFSET(pix, x, y) ((pix->width * pix->height) + \ - (pix->width * (y) / 4) + (x) / 2) + (pix->width * ((y) / 2) / 2) + (x) / 2) #define V_OFFSET(pix, x, y) ((pix->width * pix->height) + \ (pix->width * pix->height / 4) + \ - (pix->width * (y) / 4) + (x) / 2) + (pix->width * ((y) / 2) / 2) + (x) / 2) #define U2_OFFSET(pix, x, y) ((pix->width * pix->height) + \ (pix->width * (y) / 2) + (x) / 2) #define V2_OFFSET(pix, x, y) ((pix->width * pix->height) + \ (pix->width * pix->height / 2) + \ (pix->width * (y) / 2) + (x) / 2) #define UV_OFFSET(pix, x, y) ((pix->width * pix->height) + \ - (pix->width * (y) / 2) + (x)) + (pix->width * ((y) / 2)) + (x)) #define UV2_OFFSET(pix, x, y) ((pix->width * pix->height) + \ (pix->width * y) + (x))