Add DT bindings for Texas Instruments K2G SoC Display Subsystem. The DSS is quite simple, with a single plane and a single output.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/display/ti/ti,k2g-dss.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ti/ti,k2g-dss.txt
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.txt new file mode 100644 index 000000000000..1af11425eda3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.txt @@ -0,0 +1,15 @@ +Texas Instruments K2G Display Subsystem +======================================= + +Required properties: +- compatible: "ti,k2g-dss" +- reg: address and length of the register spaces for DSS submodules +- reg-names: "cfg", "common", "vid1", "ovr1", "vp1" +- clocks: phandle to fclk and vp1 clocks +- clock-names: "fck", "vp1" +- interrupts: phandle to the DISPC interrupt + +The DSS outputs are described using the device graphs as documented in +Documentation/devicetree/bindings/graph.txt. K2G DSS has a single DPI output as +port 0. +