Quoting spanda@codeaurora.org (2018-06-24 21:56:05)
On 2018-06-22 06:42, Stephen Boyd wrote:
Quoting Sandeep Panda (2018-06-21 05:32:07)
clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4MHz.
+- data-lanes: See ../../media/video-interface.txt +- lane-polarities: See ../../media/video-interface.txt
We need another property for suspend-gpios function of GPIO1. I suppose for the other GPIOs we don't need anything like this because they're output functions only? GPIO4 can do PWM and I guess if pwm is used in DT from here then the driver can mux that out of gpio4 properly. I have no idea how the hsync and vsync GPIOs would work though. I see that GPIO3 can do DSIA hsync or vsync and GPIO2 can do DSIA vsync and I would guess those are in output mode only. Maybe that's just another property on this node to indicate if we should mux out the function or not. Usually that's done from pinctrl though. I don't have a use case for those functions but I do care about suspend gpios so at least add that one please.
I was thinking of adding gpio1 (suspend-gpio) documentation when we add support for PSR feature. Since for PSR we will be using this suspoend-gpio.
Ok sure, but I don't see any harm in adding it now. I'm fine with waiting for the binding update when the PSR patches come if you feel like adding it now will delay something.