Hi Dave, Please pull tilcdc atomic modeset support and some non critical fixes.
The patches were under review [1] and there were no comments any more to the v2 series. Code has been rebased and tested on top of latest drm-next and the only change needed was to adapt to the drm_atomic_helper_swap_state() parameter change.
[1] https://lists.freedesktop.org/archives/dri-devel/2016-June/112071.html
The following changes since commit 5c6c201ccbaf9d3901f829441d457293f7ca8ef4:
drm: Paper over locking inversion after registration rework (2016-08-08 16:08:25 +1000)
are available in the git repository at:
https://github.com/jsarha/linux drm-next-tilcdc-atomic
for you to fetch changes up to e0e344e620b11b76376027087574f8ae1c7807fd:
drm/tilcdc: Change tilcdc_crtc_page_flip() to tilcdc_crtc_update_fb() (2016-08-08 23:05:19 +0300)
---------------------------------------------------------------- Jyri Sarha (29): drm/tilcdc: Restore old dpms state in pm_resume() drm/tilcdc: Move LCDC_SYNC_LOST handling inside if (ver == 2) statement drm/tilcdc: Write to LCDC_END_OF_INT_IND_REG at the end of IRQ function drm/tilcdc: Move waiting of LCDC_FRAME_DONE IRQ into stop() drm/tilcdc: Increase time out for waiting frame done interrupt drm/tilcdc: Call drm_crtc_vblank_on() and *_off() in start() and stop() drm/tilcdc: Refer to panel.txt and tfp410.txt bindings in tilcdc.txt drm/tilcdc: Avoid error print by of_graph_get_next_endpoint() drm/tilcdc: Fix tilcdc component master unloading drm/tilcdc: Make tilcdc_crtc_page_flip() public drm/tilcdc: Make tilcdc_crtc_page_flip() work if crtc is not yet on drm/tilcdc: Add dummy primary plane implementation drm/tilcdc: Initialize dummy primary plane from crtc init drm/tilcdc: Add tilcdc_crtc_mode_set_nofb() drm/tilcdc: Add tilcdc_crtc_atomic_check() drm/tilcdc: Add atomic mode config funcs drm/tilcdc: Add drm_mode_config_reset() call to tilcdc_load() drm/tilcdc: Set DRIVER_ATOMIC and use atomic crtc helpers drm/tilcdc: Remove obsolete crtc helper functions drm/tilcdc: Remove tilcdc_verify_fb() drm/tilcdc: panel: Set crtc panel info at init phase drm/tilcdc: panel: Add atomic modeset helpers to connector funcs drm/tilcdc: tfp410: Set crtc panel info at init phase drm/tilcdc: tfp410: Add atomic modeset helpers to connector funcs drm/tilcdc: Enable and disable interrupts in crtc start() and stop() drm/tilcdc: Use drm_atomic_helper_resume/suspend() drm/tilcdc: Get rid of legacy dpms mechanism drm/tilcdc: Remove unnecessary pm_runtime_get() and *_put() calls drm/tilcdc: Change tilcdc_crtc_page_flip() to tilcdc_crtc_update_fb()
.../devicetree/bindings/display/tilcdc/tilcdc.txt | 4 + drivers/gpu/drm/tilcdc/Makefile | 1 + drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 375 +++++++++++---------- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 207 ++++++------ drivers/gpu/drm/tilcdc/tilcdc_drv.h | 12 +- drivers/gpu/drm/tilcdc/tilcdc_external.c | 13 +- drivers/gpu/drm/tilcdc/tilcdc_panel.c | 11 +- drivers/gpu/drm/tilcdc/tilcdc_plane.c | 132 ++++++++ drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 8 +- 9 files changed, 465 insertions(+), 298 deletions(-) create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_plane.c