The raspberrypi_fw_pll_is_on function doesn't only apply to PLL registered in the driver, but any clock exposed by the firmware.
Since we also implement the is_prepared hook, make the function consistent with the other function names, and drop the fw from the function name.
Cc: Michael Turquette mturquette@baylibre.com Cc: Stephen Boyd sboyd@kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Maxime Ripard maxime@cerno.tech --- drivers/clk/bcm/clk-raspberrypi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 3b2da62a72f5..13b7ee148824 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -87,7 +87,7 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware, return 0; }
-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw) +static int raspberrypi_fw_is_prepared(struct clk_hw *hw) { struct raspberrypi_clk_data *data = container_of(hw, struct raspberrypi_clk_data, hw); @@ -170,7 +170,7 @@ static int raspberrypi_pll_determine_rate(struct clk_hw *hw, }
static const struct clk_ops raspberrypi_firmware_pll_clk_ops = { - .is_prepared = raspberrypi_fw_pll_is_on, + .is_prepared = raspberrypi_fw_is_prepared, .recalc_rate = raspberrypi_fw_pll_get_rate, .set_rate = raspberrypi_fw_pll_set_rate, .determine_rate = raspberrypi_pll_determine_rate,