Re: [PATCH v2 1/5] dt-bindings: display: stm32: add supply property to DSI controller

Dear Yannick, Thank you for your patch,

(already ;-) Reviewed-by: Philippe Cornu philippe.cornu@st.com

Philippe :)

On 5/10/19 4:20 PM, Yannick Fertré wrote:

This patch adds documentation of a new property phy-dsi-supply to the STM32 DSI controller.

Signed-off-by: Yannick Fertré yannick.fertre@st.com

Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt index 3eb1b48..60c54da 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI:

• panel or bridge node: A node containing the panel or bridge description as documented in [6].
  • port: panel or bridge port node, connected to the DSI output port (port@1).

+Optional properties: +- phy-dsi-supply: phandle of the regulator that provides the supply voltage.

Note: You can find more documentation in the following references [1] Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -101,6 +103,7 @@ Example 2: DSI panel clock-names = "pclk", "ref"; resets = <&rcc STM32F4_APB2_RESET(DSI)>; reset-names = "apb";

• 	phy-dsi-supply = <&reg18>;
  
  ports {
  	#address-cells = <1>;