ARM's Juno board has two HDLCD controllers, each linked to an NXP TDA19988 HDMI transmitter that provides output encoding. Add them to the device tree.
Signed-off-by: Liviu Dudau Liviu.Dudau@arm.com --- arch/arm64/boot/dts/arm/juno-base.dtsi | 70 +++++++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index c624208..a12a2b1 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -118,6 +118,34 @@ clock-names = "apb_pclk"; };
+ hdlcd@7ff50000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff50000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scpi_clk 4>; + clock-names = "pxlclk"; + + port { + hdlcd1_output: endpoint@0 { + remote-endpoint = <&tda998x_1_input>; + }; + }; + }; + + hdlcd@7ff60000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff60000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scpi_clk 4>; + clock-names = "pxlclk"; + + port { + hdlcd0_output: endpoint@0 { + remote-endpoint = <&tda998x_0_input>; + }; + }; + }; + soc_uart0: uart@7ff80000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0x7ff80000 0x0 0x1000>; @@ -136,14 +164,32 @@ i2c-sda-hold-time-ns = <500>; clocks = <&soc_smc50mhz>;
- dvi0: dvi-transmitter@70 { + hdmi-transmitter@70 { compatible = "nxp,tda998x"; reg = <0x70>; + port { + tda998x_0_input: endpoint@0 { + remote-endpoint = <&hdlcd0_output>; + }; + + tda998x_0_output: endpoint@1 { + remote-endpoint = <&hdmi0_connector_output>; + }; + }; };
- dvi1: dvi-transmitter@71 { + hdmi-transmitter@71 { compatible = "nxp,tda998x"; reg = <0x71>; + port { + tda998x_1_input: endpoint@0 { + remote-endpoint = <&hdlcd1_output>; + }; + + tda998x_1_output: endpoint@1 { + remote-endpoint = <&hdmi1_connector_output>; + }; + }; }; };
@@ -177,6 +223,26 @@ <0x00000008 0x80000000 0x1 0x80000000>; };
+ hdmi0: connector@0 { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi0_connector_output: endpoint { + remote-endpoint = <&tda998x_0_output>; + }; + }; + }; + + hdmi1: connector@1 { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi1_connector_output: endpoint { + remote-endpoint = <&tda998x_1_output>; + }; + }; + }; + smb { compatible = "simple-bus"; #address-cells = <2>;