The A2Q (Add To Queue) and UPDATE bits are left in their previous state when resetting the layer. This lead to weird behavior when enabling the plane again: the framebuffer previously queued is dequeued and we end up with access to an old memory region.
Reset those bits when resetting the channel.
Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c index 063d2a7..e79bd9b 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c @@ -311,7 +311,8 @@ int atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer)
/* Disable the layer */ regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR, - ATMEL_HLCDC_LAYER_RST); + ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q | + ATMEL_HLCDC_LAYER_UPDATE);
/* Clear all pending interrupts */ regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);