Re: [PATCH] drm/writeback: Fix the "overview" section of the doc

On Tue, 3 Jul 2018 19:40:46 +0200 Boris Brezillon boris.brezillon@bootlin.com wrote:

Fix the bullet list declaration in the overview section.

Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com

Applied to drm-misc-next.

---

drivers/gpu/drm/drm_writeback.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c index 827395071f0b..69e7a63cfcc3 100644 --- a/drivers/gpu/drm/drm_writeback.c +++ b/drivers/gpu/drm/drm_writeback.c @@ -22,10 +22,13 @@

• Writeback connectors are used to expose hardware which can write the output
• from a CRTC to a memory buffer. They are used and act similarly to other
• types of connectors, with some important differences:

• • • Writeback connectors don't provide a way to output visually to the user.
• • • Writeback connectors should always report as "disconnected" (so that
• • clients which don't understand them will ignore them).
• • • Writeback connectors don't have EDID.

• • • Writeback connectors don't provide a way to output visually to the user.
• • • Writeback connectors should always report as "disconnected" (so that
• • clients which don't understand them will ignore them).
• • • Writeback connectors don't have EDID.
  • A framebuffer may only be attached to a writeback connector when the
  • connector is attached to a CRTC. The WRITEBACK_FB_ID property which sets the