This patch adds bindings for i.MX8qxp/qm Display Processing Unit.
Reviewed-by: Rob Herring robh@kernel.org Signed-off-by: Liu Ying victor.liu@nxp.com --- v7->v8: * No change.
v6->v7: * Add Rob's R-b tag back.
v5->v6: * Use graph schema. So, drop Rob's R-b tag as review is needed.
v4->v5: * No change.
v3->v4: * Improve compatible property by using enum instead of oneOf+const. (Rob) * Add Rob's R-b tag.
v2->v3: * No change.
v1->v2: * Fix yamllint warnings. * Require bypass0 and bypass1 clocks for both i.MX8qxp and i.MX8qm, as the display controller subsystem spec does say that they exist. * Use new dt binding way to add clocks in the example. * Trivial tweaks for the example.
.../bindings/display/imx/fsl,imx8qxp-dpu.yaml | 387 +++++++++++++++++++++ 1 file changed, 387 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml new file mode 100644 index 00000000..9da9560 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml @@ -0,0 +1,387 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Display Processing Unit + +maintainers: + - Liu Ying victor.liu@nxp.com + +description: | + The Freescale i.MX8qm/qxp Display Processing Unit(DPU) is comprised of two + main components that include a blit engine for 2D graphics accelerations + and a display controller for display output processing, as well as a command + sequencer. + +properties: + compatible: + enum: + - fsl,imx8qxp-dpu + - fsl,imx8qm-dpu + + reg: + maxItems: 1 + + interrupts: + items: + - description: | + store9 shadow load interrupt(blit engine) + - description: | + store9 frame complete interrupt(blit engine) + - description: | + store9 sequence complete interrupt(blit engine) + - description: | + extdst0 shadow load interrupt + (display controller, content stream 0) + - description: | + extdst0 frame complete interrupt + (display controller, content stream 0) + - description: | + extdst0 sequence complete interrupt + (display controller, content stream 0) + - description: | + extdst4 shadow load interrupt + (display controller, safety stream 0) + - description: | + extdst4 frame complete interrupt + (display controller, safety stream 0) + - description: | + extdst4 sequence complete interrupt + (display controller, safety stream 0) + - description: | + extdst1 shadow load interrupt + (display controller, content stream 1) + - description: | + extdst1 frame complete interrupt + (display controller, content stream 1) + - description: | + extdst1 sequence complete interrupt + (display controller, content stream 1) + - description: | + extdst5 shadow load interrupt + (display controller, safety stream 1) + - description: | + extdst5 frame complete interrupt + (display controller, safety stream 1) + - description: | + extdst5 sequence complete interrupt + (display controller, safety stream 1) + - description: | + disengcfg0 shadow load interrupt + (display controller, display stream 0) + - description: | + disengcfg0 frame complete interrupt + (display controller, display stream 0) + - description: | + disengcfg0 sequence complete interrupt + (display controller, display stream 0) + - description: | + framegen0 programmable interrupt0 + (display controller, display stream 0) + - description: | + framegen0 programmable interrupt1 + (display controller, display stream 0) + - description: | + framegen0 programmable interrupt2 + (display controller, display stream 0) + - description: | + framegen0 programmable interrupt3 + (display controller, display stream 0) + - description: | + signature0 shadow load interrupt + (display controller, display stream 0) + - description: | + signature0 measurement valid interrupt + (display controller, display stream 0) + - description: | + signature0 error condition interrupt + (display controller, display stream 0) + - description: | + disengcfg1 shadow load interrupt + (display controller, display stream 1) + - description: | + disengcfg1 frame complete interrupt + (display controller, display stream 1) + - description: | + disengcfg1 sequence complete interrupt + (display controller, display stream 1) + - description: | + framegen1 programmable interrupt0 + (display controller, display stream 1) + - description: | + framegen1 programmable interrupt1 + (display controller, display stream 1) + - description: | + framegen1 programmable interrupt2 + (display controller, display stream 1) + - description: | + framegen1 programmable interrupt3 + (display controller, display stream 1) + - description: | + signature1 shadow load interrupt + (display controller, display stream 1) + - description: | + signature1 measurement valid interrupt + (display controller, display stream 1) + - description: | + signature1 error condition interrupt + (display controller, display stream 1) + - description: | + command sequencer error condition interrupt(command sequencer) + - description: | + common control software interrupt0(common control) + - description: | + common control software interrupt1(common control) + - description: | + common control software interrupt2(common control) + - description: | + common control software interrupt3(common control) + - description: | + framegen0 sychronization status activated interrupt + (display controller, safety stream 0) + - description: | + framegen0 sychronization status deactivated interrupt + (display controller, safety stream 0) + - description: | + framegen0 sychronization status activated interrupt + (display controller, content stream 0) + - description: | + framegen0 sychronization status deactivated interrupt + (display controller, content stream 0) + - description: | + framegen1 sychronization status activated interrupt + (display controller, safety stream 1) + - description: | + framegen1 sychronization status deactivated interrupt + (display controller, safety stream 1) + - description: | + framegen1 sychronization status activated interrupt + (display controller, content stream 1) + - description: | + framegen1 sychronization status deactivated interrupt + (display controller, content stream 1) + + interrupt-names: + items: + - const: store9_shdload + - const: store9_framecomplete + - const: store9_seqcomplete + - const: extdst0_shdload + - const: extdst0_framecomplete + - const: extdst0_seqcomplete + - const: extdst4_shdload + - const: extdst4_framecomplete + - const: extdst4_seqcomplete + - const: extdst1_shdload + - const: extdst1_framecomplete + - const: extdst1_seqcomplete + - const: extdst5_shdload + - const: extdst5_framecomplete + - const: extdst5_seqcomplete + - const: disengcfg_shdload0 + - const: disengcfg_framecomplete0 + - const: disengcfg_seqcomplete0 + - const: framegen0_int0 + - const: framegen0_int1 + - const: framegen0_int2 + - const: framegen0_int3 + - const: sig0_shdload + - const: sig0_valid + - const: sig0_error + - const: disengcfg_shdload1 + - const: disengcfg_framecomplete1 + - const: disengcfg_seqcomplete1 + - const: framegen1_int0 + - const: framegen1_int1 + - const: framegen1_int2 + - const: framegen1_int3 + - const: sig1_shdload + - const: sig1_valid + - const: sig1_error + - const: cmdseq_error + - const: comctrl_sw0 + - const: comctrl_sw1 + - const: comctrl_sw2 + - const: comctrl_sw3 + - const: framegen0_primsync_on + - const: framegen0_primsync_off + - const: framegen0_secsync_on + - const: framegen0_secsync_off + - const: framegen1_primsync_on + - const: framegen1_primsync_off + - const: framegen1_secsync_on + - const: framegen1_secsync_off + + clocks: + maxItems: 8 + + clock-names: + items: + - const: axi + - const: cfg + - const: pll0 + - const: pll1 + - const: bypass0 + - const: bypass1 + - const: disp0 + - const: disp1 + + power-domains: + items: + - description: DC power-domain + - description: PLL0 power-domain + - description: PLL1 power-domain + + power-domain-names: + items: + - const: dc + - const: pll0 + - const: pll1 + + fsl,dpr-channels: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandle which points to DPR channels associated with + this DPU instance. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The DPU output port node from display stream0. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The DPU output port node from display stream1. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - power-domain-names + - fsl,dpr-channels + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + dpu@56180000 { + compatible = "fsl,imx8qxp-dpu"; + reg = <0x56180000 0x40000>; + interrupt-parent = <&dc0_irqsteer>; + interrupts = <448>, <449>, <450>, <64>, + <65>, <66>, <67>, <68>, + <69>, <70>, <193>, <194>, + <195>, <196>, <197>, <72>, + <73>, <74>, <75>, <76>, + <77>, <78>, <79>, <80>, + <81>, <199>, <200>, <201>, + <202>, <203>, <204>, <205>, + <206>, <207>, <208>, <0>, + <1>, <2>, <3>, <4>, + <82>, <83>, <84>, <85>, + <209>, <210>, <211>, <212>; + interrupt-names = "store9_shdload", + "store9_framecomplete", + "store9_seqcomplete", + "extdst0_shdload", + "extdst0_framecomplete", + "extdst0_seqcomplete", + "extdst4_shdload", + "extdst4_framecomplete", + "extdst4_seqcomplete", + "extdst1_shdload", + "extdst1_framecomplete", + "extdst1_seqcomplete", + "extdst5_shdload", + "extdst5_framecomplete", + "extdst5_seqcomplete", + "disengcfg_shdload0", + "disengcfg_framecomplete0", + "disengcfg_seqcomplete0", + "framegen0_int0", + "framegen0_int1", + "framegen0_int2", + "framegen0_int3", + "sig0_shdload", + "sig0_valid", + "sig0_error", + "disengcfg_shdload1", + "disengcfg_framecomplete1", + "disengcfg_seqcomplete1", + "framegen1_int0", + "framegen1_int1", + "framegen1_int2", + "framegen1_int3", + "sig1_shdload", + "sig1_valid", + "sig1_error", + "cmdseq_error", + "comctrl_sw0", + "comctrl_sw1", + "comctrl_sw2", + "comctrl_sw3", + "framegen0_primsync_on", + "framegen0_primsync_off", + "framegen0_secsync_on", + "framegen0_secsync_off", + "framegen1_primsync_on", + "framegen1_primsync_off", + "framegen1_secsync_on", + "framegen1_secsync_off"; + clocks = <&dc0_dpu_lpcg IMX_LPCG_CLK_5>, + <&dc0_dpu_lpcg IMX_LPCG_CLK_4>, + <&clk IMX_SC_R_DC_0_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_DC_0_PLL_1 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_DC_0_VIDEO0 IMX_SC_PM_CLK_BYPASS>, + <&clk IMX_SC_R_DC_0_VIDEO1 IMX_SC_PM_CLK_BYPASS>, + <&dc0_disp_lpcg IMX_LPCG_CLK_0>, + <&dc0_disp_lpcg IMX_LPCG_CLK_1>; + clock-names = "axi", "cfg", + "pll0", "pll1", "bypass0", "bypass1", + "disp0", "disp1"; + power-domains = <&pd IMX_SC_R_DC_0>, + <&pd IMX_SC_R_DC_0_PLL_0>, + <&pd IMX_SC_R_DC_0_PLL_1>; + power-domain-names = "dc", "pll0", "pll1"; + fsl,dpr-channels = <&dc0_dpr1_channel1>, + <&dc0_dpr1_channel2>, + <&dc0_dpr1_channel3>, + <&dc0_dpr2_channel1>, + <&dc0_dpr2_channel2>, + <&dc0_dpr2_channel3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu0_disp0_pixel_combiner0_ch0: endpoint { + remote-endpoint = <&pixel_combiner0_ch0_dpu0_disp0>; + }; + }; + + port@1 { + reg = <1>; + dpu0_disp1_pixel_combiner0_ch1: endpoint { + remote-endpoint = <&pixel_combiner0_ch1_dpu0_disp1>; + }; + }; + }; + };