Convert the ingenic,pinctrl.txt doc file to ingenic,pinctrl.yaml.
In the process, some compatible strings now require a fallback, as the corresponding SoCs are pin-compatible with their fallback variant.
Signed-off-by: Paul Cercueil paul@crapouillou.net --- .../bindings/pinctrl/ingenic,pinctrl.txt | 81 ---------- .../bindings/pinctrl/ingenic,pinctrl.yaml | 138 ++++++++++++++++++ 2 files changed, 138 insertions(+), 81 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt deleted file mode 100644 index d9b2100c98e8..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt +++ /dev/null @@ -1,81 +0,0 @@ -Ingenic XBurst pin controller - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -For the XBurst SoCs, pin control is tightly bound with GPIO ports. All pins may -be used as GPIOs, multiplexed device functions are configured within the -GPIO port configuration registers and it is typical to refer to pins using the -naming scheme "PxN" where x is a character identifying the GPIO port with -which the pin is associated and N is an integer from 0 to 31 identifying the -pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and -PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830 -contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the -jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins. - - -Required properties: --------------------- - - - compatible: One of: - - "ingenic,jz4740-pinctrl" - - "ingenic,jz4725b-pinctrl" - - "ingenic,jz4760-pinctrl" - - "ingenic,jz4760b-pinctrl" - - "ingenic,jz4770-pinctrl" - - "ingenic,jz4780-pinctrl" - - "ingenic,x1000-pinctrl" - - "ingenic,x1000e-pinctrl" - - "ingenic,x1500-pinctrl" - - "ingenic,x1830-pinctrl" - - reg: Address range of the pinctrl registers. - - -Required properties for sub-nodes (GPIO chips): ------------------------------------------------ - - - compatible: Must contain one of: - - "ingenic,jz4740-gpio" - - "ingenic,jz4760-gpio" - - "ingenic,jz4770-gpio" - - "ingenic,jz4780-gpio" - - "ingenic,x1000-gpio" - - "ingenic,x1830-gpio" - - reg: The GPIO bank number. - - interrupt-controller: Marks the device node as an interrupt controller. - - interrupts: Interrupt specifier for the controllers interrupt. - - #interrupt-cells: Should be 2. Refer to - ../interrupt-controller/interrupts.txt for more details. - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - - gpio-ranges: Range of pins managed by the GPIO controller. Refer to - ../gpio/gpio.txt for more details. - - -Example: --------- - -pinctrl: pin-controller@10010000 { - compatible = "ingenic,jz4740-pinctrl"; - reg = <0x10010000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - gpa: gpio@0 { - compatible = "ingenic,jz4740-gpio"; - reg = <0>; - - gpio-controller; - gpio-ranges = <&pinctrl 0 0 32>; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&intc>; - interrupts = <28>; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml new file mode 100644 index 000000000000..adf462cc2737 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs pin controller devicetree bindings + +description: > + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins + may be used as GPIOs, multiplexed device functions are configured within the + GPIO port configuration registers and it is typical to refer to pins using the + naming scheme "PxN" where x is a character identifying the GPIO port with + which the pin is associated and N is an integer from 0 to 31 identifying the + pin within that GPIO port. For example PA0 is the first pin in GPIO port A, + and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830 + contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the + JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192 + pins. + +maintainers: + - Paul Cercueil paul@crapouillou.net + +properties: + nodename: + pattern: "^pin-controller@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4740-pinctrl + - ingenic,jz4725b-pinctrl + - ingenic,jz4760-pinctrl + - ingenic,jz4770-pinctrl + - ingenic,jz4780-pinctrl + - ingenic,x1000-pinctrl + - ingenic,x1500-pinctrl + - ingenic,x1830-pinctrl + - items: + - const: ingenic,jz4760b-pinctrl + - const: ingenic,jz4760-pinctrl + - items: + - const: ingenic,x1000e-pinctrl + - const: ingenic,x1000-pinctrl + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^gpio@[0-9]$": + type: object + properties: + compatible: + enum: + - ingenic,jz4740-gpio + - ingenic,jz4725b-gpio + - ingenic,jz4760-gpio + - ingenic,jz4770-gpio + - ingenic,jz4780-gpio + - ingenic,x1000-gpio + - ingenic,x1500-gpio + - ingenic,x1830-gpio + + reg: + items: + - description: The GPIO bank number + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + Refer to ../interrupt-controller/interrupts.txt for more details. + + interrupts: + maxItems: 1 + + required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupts + - interrupt-controller + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + pin-controller@10010000 { + compatible = "ingenic,jz4770-pinctrl"; + reg = <0x10010000 0x600>; + + #address-cells = <1>; + #size-cells = <0>; + + gpio@0 { + compatible = "ingenic,jz4770-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + };