This patch series add a DRM driver for the OpenCores VGA/LCD display controller. Another driver exists for this devices, but it is a old framebuffer driver ("ocfb").
If there is any interest in doing so, this driver could possibly the "ocfb" driver.
With respect to the old framebuffer driver, this driver allows for using DRM bridge encoders, and to specify a pixelclock source in the DT.
Tested on a Xilinx Zynq on a Myir Z-Turn board (the IP has been slightly modified in order to fit in).
While this device was intended for VGA monitors or LCD panels, we are using it with a sii902x bridge encoder and a HDMI monitor. (sii902x driver taken from patch floating on LKML)
Andrea Merello (2): drm: Add drm driver for OpenCores VGA/LCD display controller drm: Add DT bindings documentation for OpenCores VGA/LCD controller
.../bindings/display/opencores,ocdrm.txt | 27 ++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/ocdrm/Kconfig | 7 + drivers/gpu/drm/ocdrm/Makefile | 7 + drivers/gpu/drm/ocdrm/ocdrm_crtc.c | 336 +++++++++++++++++++++ drivers/gpu/drm/ocdrm/ocdrm_crtc.h | 48 +++ drivers/gpu/drm/ocdrm/ocdrm_drv.c | 312 +++++++++++++++++++ drivers/gpu/drm/ocdrm/ocdrm_drv.h | 89 ++++++ drivers/gpu/drm/ocdrm/ocdrm_encoder.c | 95 ++++++ drivers/gpu/drm/ocdrm/ocdrm_encoder.h | 48 +++ 11 files changed, 972 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/opencores,ocdrm.txt create mode 100644 drivers/gpu/drm/ocdrm/Kconfig create mode 100644 drivers/gpu/drm/ocdrm/Makefile create mode 100644 drivers/gpu/drm/ocdrm/ocdrm_crtc.c create mode 100644 drivers/gpu/drm/ocdrm/ocdrm_crtc.h create mode 100644 drivers/gpu/drm/ocdrm/ocdrm_drv.c create mode 100644 drivers/gpu/drm/ocdrm/ocdrm_drv.h create mode 100644 drivers/gpu/drm/ocdrm/ocdrm_encoder.c create mode 100644 drivers/gpu/drm/ocdrm/ocdrm_encoder.h
-- 1.9.1