OK, I will update patches 1 and 2 and given your RBs push them since they fix some races. I will then update and test patch 3 on some basic scenarios and will send it for separate review where I might put a TODO comment in code with my objections regarding long jobs form our discussion so you can see and reply on that.
Andrey
On 01/24/2019 06:34 AM, Koenig, Christian wrote:
I see a few cleanups on Patch #3 which actually belong in patch #1:
+void drm_sched_stop(struct drm_gpu_scheduler *sched, struct drm_sched_job *bad)
The "bad" job parameter actually isn't used any more, isn't it?
+retry_wait:
Not used any more.
But apart from that at least patch #1 and #2 look like they can have my rb now.
Patch #3 looks also like it should work after a bit of polishing.
Thanks, Christian.
Am 18.01.19 um 20:15 schrieb Grodzovsky, Andrey:
Attached series is the first 2 patches we already discussed about ring mirror list handling racing with all your comments fixed (still not committed). The third patch is a prototype based on the first 2 patches and on our discussion.
Please take a look.
Andrey
On 01/18/2019 01:32 PM, Koenig, Christian wrote:
Am 18.01.19 um 18:34 schrieb Grodzovsky, Andrey:
On 01/18/2019 12:10 PM, Koenig, Christian wrote:
Am 18.01.19 um 16:21 schrieb Grodzovsky, Andrey:
On 01/18/2019 04:25 AM, Koenig, Christian wrote: > [SNIP] >>>>> Re-arming the timeout should probably have a much reduced value >>>>> when the job hasn't changed. E.g. something like a few ms. >> Now i got thinking about non hanged job in progress (job A) and let's >> say it's a long job , it just started executing but due to time out of >> another job (job B) on another (or this scheduler) it's parent cb got >> disconnected, we disarmed the tdr timer for the job's scheduler, >> meanwhile the timed out job did manage to complete before HW reset >> check and hence we skip HW reset, attach back the cb and rearm job's A >> tdr timer with a future value of few ms only - aren't we going to get >> false tdr triggered on job B now because we didn't let it enough time >> to run and complete ? I would prefer the other extreme of longer time >> for time out to trigger then false TDR. Optimally we would have per >> job timer and rearm to exactly the reminder of it's time out value - >> but we gave up on per job tdr work long ago. > Well we only re-arm the timeout with a shorter period if it already > triggered once. If we just suspend the timeout then we should still use > the longer period. Can you explain more on this ? I don't get it.
See drm_sched_job_timedout(), we re-arm the timeout at the end of the procedure.
We should change that and re-arm the timer with a much lower timeout if the job is still not finished.
Christian.
I still don't see how this can fix the problem of of long job in progress triggering false tdr if no HW reset was done, but maybe I am missing other pieces you have in mind, I will finish the patch and send it and then we can be more specific based on the code.
Ok sounds good. We should probably discuss less on details and prototype a bit more.
Might be that I'm missing something here as well, so probably good to have some code to talk about things more directly.
Christian.
Andrey
Andrey
>> In general the more i think about it (correct me if I am wrong) I am >> less sure how much the optimization feature is useful - if job's time >> out did trigger what are the chances that the little more time we give >> it between beginning of tdr function and the time we do start the >> actual HW reset will be exactly what it needed to complete. Also, this >> is still not water proof as the job might complete and signal it's HW >> fence exactly after we checked for completion but before starting the >> HW reset code. > I don't see this as an optimization, but rather as mandatory for correct > operation. > > See without this we can run into issues because we execute jobs multiple > times. That can still happen with this clean handling, but it is much > more unlikely. > > Christian. > >> Andrey >> >>>> By unchanged you mean when we didn't resubmit the job because of the >>>> optimized non HW reset, right ? >>> Correct, yes. >>> >>>>>> About flushing tdr jobs in progress from .free_job cb - looks like >>>>>> drm_sched_job_finish->cancel_delayed_work_sync is not enough, we >>>>>> still need to take care of flushing all sced->work_tdr for a >>>>>> device and for all devices in hive for XGMI. >>>>>> What do you think ? >>>>> Why should that be necessary? We only wait for the delayed work to >>>>> make sure that the job is not destroyed while dealing with it. >>>>> >>>>> Christian. >>>> But we might not be waiting for the correct sched->work_tdr, we do >>>> the reset routine for all schedulers in a device accessing their >>>> jobs too and not only for the scheduler to which the job belongs. >>>> For XGMI not only that, we reset all the devices in the hive. >>> That is harmless you only need to wait for the work_tdr of the >>> current scheduler, not for all of them. >>> >>>> I was thinking, amdgpu driver is not even interested in allowing >>>> multiple sced->tdr to execute together - we have to serialize all of >>>> them anyway with the trylock mutex (even without XGMI), v3d in >>>> v3d_job_timedout seems also to reset all of his schedulers from the >>>> tdr work. Would it make sense to provide the sched->work_td as init >>>> parameter to scheduler (same one for all schedulers) so we can >>>> enforce serialization by disallowing more then 1 tdr work to execute >>>> in the same time ? Other drivers interested to do in parallel can >>>> provide unique sched->work_tdr per scheduler. This does imply >>>> drm_sched_job_timedout has to removed and delegated to specific >>>> driver implementation as probably other code dealing with >>>> sched->work_tdr... Maybe even move tdr handling to the driver all >>>> together ? >>> Yeah, I was thinking something similar. The problem with this >>> approach is that a delayed work item can have only one delay, but for >>> multiple engines we need multiple delays. >>> >>> What we could do is to make it a timer instead and raise the work >>> item from the device specific callback. >>> >>> But that doesn't really saves us the stop all schedulers trouble, so >>> it doesn't buy us much in the end if I see this correctly. >>> >>> Christian. > _______________________________________________ > amd-gfx mailing list > amd-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/amd-gfx