When connected to the MIPI DSI output, we need to use N{H,V}SYNC for the internal connection but these flags are meaningless for DSI panels. Switch the test so that we do not set the P{H,V}SYNC bits unless the mode requires it.
Signed-off-by: John Keeping john@metanate.com Reviewed-by: Mark Yao mark.yao@rock-chips.com Reviewed-by: Sean Paul seanpaul@chromium.org --- v4: - Add Sean's Reviewed-by v3: - Add Mark's Reviewed-by Unchanged in v2 --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index c7eba305c488..67aefc6d4e9a 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -933,8 +933,8 @@ static void vop_crtc_enable(struct drm_crtc *crtc) }
pin_pol = 0x8; - pin_pol |= (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1; - pin_pol |= (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : (1 << 1); + pin_pol |= (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) ? 1 : 0; + pin_pol |= (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) ? (1 << 1) : 0; VOP_CTRL_SET(vop, pin_pol, pin_pol);
switch (s->output_type) {