As of current version the picture aspect ratio and active aspect ratio are not being set when the video mode changes. This patch fixes this problem by setting the picture aspect ratio according to the current video mode and also sets the active aspect ratio to be the same as picture aspect ratio.
Signed-off-by: Jose Abreu joabreu@synopsys.com --- drivers/gpu/drm/i2c/adv7511.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c index a02112b..c9aa83a 100644 --- a/drivers/gpu/drm/i2c/adv7511.c +++ b/drivers/gpu/drm/i2c/adv7511.c @@ -672,7 +672,7 @@ static void adv7511_encoder_mode_set(struct drm_encoder *encoder, struct drm_display_mode *adj_mode) { struct adv7511 *adv7511 = encoder_to_adv7511(encoder); - unsigned int low_refresh_rate; + unsigned int low_refresh_rate, picture_aspect; unsigned int hsync_polarity = 0; unsigned int vsync_polarity = 0;
@@ -754,6 +754,26 @@ static void adv7511_encoder_mode_set(struct drm_encoder *encoder, regmap_update_bits(adv7511->regmap, 0x17, 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+ switch (adj_mode->picture_aspect_ratio) { + case HDMI_PICTURE_ASPECT_NONE: + picture_aspect = 0x0; + break; + case HDMI_PICTURE_ASPECT_4_3: + picture_aspect = 0x1; + break; + case HDMI_PICTURE_ASPECT_16_9: + picture_aspect = 0x2; + break; + default: + picture_aspect = 0x3; + break; + } + + regmap_update_bits(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME(1), + 0x30, (picture_aspect << 4)); + regmap_update_bits(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME(1), + 0x0F, 0x08); + /* * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is * supposed to give better results.