Here are a brief introduction to Innosilicon HDMI IP: - Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter - Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec - Digital video interface supports a pixel size of 24, 30, 36, 48bits color depth in RGB - S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission (32-192kHz Fs) using IEC60958 and IEC 61937 - The EDID and CEC function are also supported by Innosilicon HDMI Transmitter Controlle
Changes in v4: - Modify the commit title "drm/rockchip: hdmi: ..." (Mark) - Correct the "DKMS" to "DPMS" (Mark) - Fix over 80 characters problems (Mark) - Remove encoder .prepare/.commit helper functions, and move the vop mode configure function into encoder .enable helper functions. (Mark)
Changes in v3: - Use encoder enable/disable function, and remove the encoder DPMS function - Keep HDMI PLL power on in standby mode
Changes in v2: - Using DRM atomic helper functions for connector init (Mark) - Remove "hdmi->connector.encoder = encoder;" (Mark)
Yakir Yang (1): drm/rockchip: hdmi: add Innosilicon HDMI support
drivers/gpu/drm/rockchip/Kconfig | 8 + drivers/gpu/drm/rockchip/Makefile | 1 + drivers/gpu/drm/rockchip/inno_hdmi.c | 992 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/rockchip/inno_hdmi.h | 364 +++++++++++++ 4 files changed, 1365 insertions(+) create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h