Add flexibility by moving the dpi limits to the SoC specific config
Signed-off-by: Guillaume Ranquet granquet@baylibre.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com --- drivers/gpu/drm/mediatek/mtk_dpi.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index 4554e2de1430..4746eb342567 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -125,6 +125,7 @@ struct mtk_dpi_conf { bool edge_sel_en; const u32 *output_fmts; u32 num_output_fmts; + const struct mtk_dpi_yc_limit *limit; };
static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) @@ -235,9 +236,10 @@ static void mtk_dpi_config_fb_size(struct mtk_dpi *dpi, u32 width, u32 height) mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK); }
-static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi, - struct mtk_dpi_yc_limit *limit) +static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi) { + const struct mtk_dpi_yc_limit *limit = dpi->conf->limit; + mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_bottom << Y_LIMINT_BOT, Y_LIMINT_BOT_MASK); mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_top << Y_LIMINT_TOP, @@ -449,7 +451,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi) static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, struct drm_display_mode *mode) { - struct mtk_dpi_yc_limit limit; struct mtk_dpi_polarities dpi_pol; struct mtk_dpi_sync_param hsync; struct mtk_dpi_sync_param vsync_lodd = { 0 }; @@ -484,11 +485,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", pll_rate, vm.pixelclock);
- limit.c_bottom = 0x0010; - limit.c_top = 0x0FE0; - limit.y_bottom = 0x0010; - limit.y_top = 0x0FE0; - dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING; dpi_pol.de_pol = MTK_DPI_POLARITY_RISING; dpi_pol.hsync_pol = vm.flags & DISPLAY_FLAGS_HSYNC_HIGH ? @@ -536,7 +532,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, else mtk_dpi_config_fb_size(dpi, vm.hactive, vm.vactive);
- mtk_dpi_config_channel_limit(dpi, &limit); + mtk_dpi_config_channel_limit(dpi); mtk_dpi_config_bit_num(dpi, dpi->bit_num); mtk_dpi_config_channel_swap(dpi, dpi->channel_swap); mtk_dpi_config_yc_map(dpi, dpi->yc_map); @@ -790,12 +786,20 @@ static const u32 mt8183_output_fmts[] = { MEDIA_BUS_FMT_RGB888_2X12_BE, };
+static const struct mtk_dpi_yc_limit mtk_dpi_limit = { + .c_bottom = 0x0010, + .c_top = 0x0FE0, + .y_bottom = 0x0010, + .y_top = 0x0FE0, +}; + static const struct mtk_dpi_conf mt8173_conf = { .cal_factor = mt8173_calculate_factor, .reg_h_fre_con = 0xe0, .max_clock_khz = 300000, .output_fmts = mt8173_output_fmts, .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts), + .limit = &mtk_dpi_limit, };
static const struct mtk_dpi_conf mt2701_conf = { @@ -805,6 +809,7 @@ static const struct mtk_dpi_conf mt2701_conf = { .max_clock_khz = 150000, .output_fmts = mt8173_output_fmts, .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts), + .limit = &mtk_dpi_limit, };
static const struct mtk_dpi_conf mt8183_conf = { @@ -813,6 +818,7 @@ static const struct mtk_dpi_conf mt8183_conf = { .max_clock_khz = 100000, .output_fmts = mt8183_output_fmts, .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts), + .limit = &mtk_dpi_limit, };
static const struct mtk_dpi_conf mt8192_conf = { @@ -821,6 +827,7 @@ static const struct mtk_dpi_conf mt8192_conf = { .max_clock_khz = 150000, .output_fmts = mt8173_output_fmts, .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts), + .limit = &mtk_dpi_limit, };
static int mtk_dpi_probe(struct platform_device *pdev)