Hi Biju,
On Thu, Apr 21, 2022 at 6:31 PM Biju Das biju.das.jz@bp.renesas.com wrote:
The RZ/G2L LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
The DU module supports the following hardware features − Display Parallel Interface (DPI) and MIPI LINK Video Interface − Display timing master − Generates video timings − Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE − Supports Progressive − Input data format (from VSPD): RGB888, RGB666 − Output data format: same as Input data format − Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output − Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
This patch document DU module found on RZ/G2L LCDC.
Signed-off-by: Biju Das biju.das.jz@bp.renesas.com
Thanks for your patch!
--- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Renesas RZ/G2L Display Unit (DU)
+maintainers:
- Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
- Biju Das biju.das.jz@bp.renesas.com
+description: |
- These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
- and RZ/V2L SoCs.
+properties:
- compatible:
- enum:
- renesas,du-r9a07g044c # for RZ/G2LC compatible DU
- renesas,du-r9a07g044l # for RZ/G2L compatible DU
Please use the format "<manuf>,<soc>-<modulo>" for new bindings.
I thought there was no need to differentiate RZ/G2LC and RZ/G2L, as the only difference is a wiring difference due to the limited number of pins on the RZ/G2LC package, as per your confirmation[1]? Hence please just use "renesas,r9a07g044-du".
Do you want a family-specific compatible value ("rzg2l-"), as this IP block is shared by (at least) RZ/GL(C), RZ/V2L, and RZ/G2UL?
+allOf:
- if:
properties:
compatible:
contains:
enum:
- renesas,du-r9a07g044c
- then:
properties:
ports:
properties:
port@0:
description: DSI 0
required:
- port@0
- if:
properties:
compatible:
contains:
enum:
- renesas,du-r9a07g044l
- then:
properties:
ports:
properties:
port@0:
description: DPAD 0
port@1:
description: DSI 0
required:
- port@0
- port@1
Having different port numbers for the common DSI0 output indeed complicates matters ;-)
[1] https://lore.kernel.org/r/OS0PR01MB5922C4C58329F538A418547886ED9@OS0PR01MB59...
Gr{oetje,eeting}s,
Geert
-- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds