Assign DSI clock source parents to DSI PHY clocks.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Abhinav Kumar abhinavk@codeaurora.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 4c0de12aaba6..69bf2e90cbce 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2491,6 +2491,9 @@ dsi0: dsi@ae94000 { "iface", "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>;
@@ -2558,6 +2561,9 @@ dsi1: dsi@ae96000 { "iface", "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>;