Add support type switch by pericfg register between USB3, PCIe, SATA, SGMII, this is used to replace the way through efuse or jumper.
Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com --- .../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 838852cb8527..9e6c0f43f1c6 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -201,6 +201,22 @@ patternProperties: Specify the flag to enable BC1.2 if support it type: boolean
+ mediatek,syscon-type: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of type switch, + the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register offset + - description: + The third cell represents the index of config segment + enum: [0, 1, 2, 3] + required: - reg - "#phy-cells"