From: Sebastian Reichel sebastian.reichel@collabora.com
Complete the direction reversal of the DSS device enable/disable operations started by commit 19b4200d8f4b ("drm/omap: Reverse direction of the DSS device enable/disable operations").
This effectively drops the requirement of calling DSS specific code from the DSI panel driver moving it a bit further to a standard drm_panel driver.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com --- .../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 74 +++++++++---------- drivers/gpu/drm/omapdrm/omap_encoder.c | 28 ++----- 2 files changed, 45 insertions(+), 57 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c index ccaf6ffe4f86..b72930dcbdf4 100644 --- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c +++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c @@ -284,27 +284,6 @@ static int dsicm_power_on(struct panel_drv_data *ddata) struct omap_dss_device *src = ddata->src; u8 id1, id2, id3; int r; - struct omap_dss_dsi_config dsi_config = { - .vm = &ddata->vm, - .hs_clk_min = 150000000, - .hs_clk_max = 300000000, - .lp_clk_min = 7000000, - .lp_clk_max = 10000000, - }; - - r = regulator_bulk_enable(ARRAY_SIZE(ddata->supplies), ddata->supplies); - if (r) { - dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r); - return r; - } - - r = src->ops->dsi.set_config(src, &dsi_config); - if (r) { - dev_err(&ddata->dsi->dev, "failed to configure DSI\n"); - goto err_regulators; - } - - src->ops->enable(src);
dsicm_hw_reset(ddata);
@@ -359,12 +338,6 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
dsicm_hw_reset(ddata);
- src->ops->disable(src); -err_regulators: - r = regulator_bulk_disable(ARRAY_SIZE(ddata->supplies), ddata->supplies); - if (r) - dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r); - return r; }
@@ -373,6 +346,8 @@ static void dsicm_power_off(struct panel_drv_data *ddata) struct omap_dss_device *src = ddata->src; int r;
+ ddata->enabled = false; + src->ops->dsi.disable_video_output(src, ddata->dsi->channel);
r = mipi_dsi_dcs_set_display_off(ddata->dsi); @@ -384,14 +359,6 @@ static void dsicm_power_off(struct panel_drv_data *ddata) "error disabling panel, issuing HW reset\n"); dsicm_hw_reset(ddata); } - - src->ops->disable(src); - - r = regulator_bulk_disable(ARRAY_SIZE(ddata->supplies), ddata->supplies); - if (r) - dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r); - - ddata->enabled = false; }
static int dsicm_connect(struct omap_dss_device *src, @@ -411,6 +378,29 @@ static void dsicm_disconnect(struct omap_dss_device *src, ddata->src = NULL; }
+static void dsicm_pre_enable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + struct omap_dss_device *src = ddata->src; + int r; + struct omap_dss_dsi_config dsi_config = { + .vm = &ddata->vm, + .hs_clk_min = 150000000, + .hs_clk_max = 300000000, + .lp_clk_min = 7000000, + .lp_clk_max = 10000000, + }; + + r = regulator_bulk_enable(ARRAY_SIZE(ddata->supplies), ddata->supplies); + if (r) + dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r); + + r = src->ops->dsi.set_config(src, &dsi_config); + if (r) { + dev_err(&ddata->dsi->dev, "failed to configure DSI\n"); + } +} + static void dsicm_enable(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = to_panel_data(dssdev); @@ -445,6 +435,16 @@ static void dsicm_disable(struct omap_dss_device *dssdev) mutex_unlock(&ddata->lock); }
+static void dsicm_post_disable(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *ddata = to_panel_data(dssdev); + int r; + + r = regulator_bulk_disable(ARRAY_SIZE(ddata->supplies), ddata->supplies); + if (r) + dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r); +} + static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable) { struct mipi_dsi_device *dsi = ddata->dsi; @@ -498,8 +498,10 @@ static const struct omap_dss_device_ops dsicm_ops = { .connect = dsicm_connect, .disconnect = dsicm_disconnect,
+ .pre_enable = dsicm_pre_enable, .enable = dsicm_enable, .disable = dsicm_disable, + .post_disable = dsicm_post_disable,
.get_modes = dsicm_get_modes, .check_timings = dsicm_check_timings, @@ -655,8 +657,6 @@ static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
omapdss_device_unregister(dssdev);
- if (omapdss_device_is_enabled(dssdev)) - dsicm_disable(dssdev); omapdss_device_disconnect(ddata->src, dssdev);
sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group); diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c index a2b08d32baad..8ec4206b8e3e 100644 --- a/drivers/gpu/drm/omapdrm/omap_encoder.c +++ b/drivers/gpu/drm/omapdrm/omap_encoder.c @@ -136,16 +136,10 @@ static void omap_encoder_disable(struct drm_encoder *encoder) */ omapdss_device_disable(dssdev->next);
- /* - * Disable the internal encoder. This will disable the DSS output. The - * DSI is treated as an exception as DSI pipelines still use the legacy - * flow where the pipeline output controls the encoder. - */ - if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) { - if (dssdev->ops && dssdev->ops->disable) - dssdev->ops->disable(dssdev); - dssdev->state = OMAP_DSS_DISPLAY_DISABLED; - } + /* Disable the internal encoder. This will disable the DSS output. */ + if (dssdev->ops && dssdev->ops->disable) + dssdev->ops->disable(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
/* * Perform the post-disable operations on the chain of external devices @@ -165,16 +159,10 @@ static void omap_encoder_enable(struct drm_encoder *encoder) /* Prepare the chain of external devices for pipeline enable. */ omapdss_device_pre_enable(dssdev->next);
- /* - * Enable the internal encoder. This will enable the DSS output. The - * DSI is treated as an exception as DSI pipelines still use the legacy - * flow where the pipeline output controls the encoder. - */ - if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) { - if (dssdev->ops && dssdev->ops->enable) - dssdev->ops->enable(dssdev); - dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; - } + /* Enable the internal encoder. This will enable the DSS output. */ + if (dssdev->ops && dssdev->ops->enable) + dssdev->ops->enable(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
/* * Enable the chain of external devices, starting at the one at the