Hey AngeloGioacchino,
On Tue, 2 Nov 2021 at 14:08, AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com wrote:
Entering suspend while the display attached to this bridge is still on makes the resume sequence to resume the bridge first, display last: when this happens, we get a timeout while resuming the bridge, as its MCU will get stuck due to the display being unpowered.
On the other hand, on mt8173-elm, closing the lid makes the display to get powered off first, bridge last, so at resume time the sequence is swapped (compared to the first example) and everything just works as expected.
Add a stateless device link to the DRM device that this bridge belongs to, ensuring a correct resume sequence and solving the unability to correctly resume bridge operation in the first mentioned example.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 45100edd745b..191cc196c9d1 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -100,6 +100,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
struct device_link *link; bool powered;};
@@ -460,10 +461,23 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge, goto err_aux_register; }
ps_bridge->link = device_link_add(bridge->dev->dev, dev, DL_FLAG_STATELESS);if (!ps_bridge->link) {dev_err(dev, "failed to create device link");ret = -EINVAL;goto err_devlink;}/* Attach the panel-bridge to the dsi bridge */
return drm_bridge_attach(bridge->encoder, ps_bridge->panel_bridge,
ret = drm_bridge_attach(bridge->encoder, ps_bridge->panel_bridge, &ps_bridge->bridge, flags);if (ret)goto err_bridge_attach;+err_bridge_attach:
device_link_del(ps_bridge->link);+err_devlink:
drm_dp_aux_unregister(&ps_bridge->aux);err_aux_register: mipi_dsi_detach(dsi); err_dsi_attach: @@ -473,7 +487,11 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge,
static void ps8640_bridge_detach(struct drm_bridge *bridge) {
drm_dp_aux_unregister(&bridge_to_ps8640(bridge)->aux);
struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);drm_dp_aux_unregister(&ps_bridge->aux);if (ps_bridge->link)device_link_del(ps_bridge->link);}
static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
2.33.1
This patch does not apply on drm-misc-next, could you rebase it on the current branch?