2015-10-20 21:53 GMT+09:00 Andrzej Hajda a.hajda@samsung.com:
On 10/20/2015 02:30 PM, Krzysztof Kozlowski wrote:
W dniu 20.10.2015 o 18:22, Andrzej Hajda pisze:
DECON-TV(Display and Enhancement Controller for TV) is a variation of DECON IP. Its main purpose is to produce video stream for HDMI IP.
Signed-off-by: Andrzej Hajda a.hajda@samsung.com
.../devicetree/bindings/video/exynos5433-decon.txt | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos5433-decon.txt b/Documentation/devicetree/bindings/video/exynos5433-decon.txt index 3dff78b..2a88c8d 100644 --- a/Documentation/devicetree/bindings/video/exynos5433-decon.txt +++ b/Documentation/devicetree/bindings/video/exynos5433-decon.txt @@ -5,24 +5,27 @@ Exynos series of SoCs which transfers the image data from a video memory buffer to an external LCD interface.
Required properties: -- compatible: value should be "samsung,exynos5433-decon"; +- compatible: value should be one of:
- "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
Until this point it looked good.
- reg: physical base address and length of the DECON registers set.
-- interrupts: should contain a list of all DECON IP block interrupts in the
order: VSYNC, LCD_SYSTEM. The interrupt specifier formatdepends on the interrupt controller used.-- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
in the same order as they were listed in the interruptsproperty.+- interrupts: should contain interrupt specifier of VSYNC and optionally
LCD_SYSTEM. The interrupt specifier format depends onthe interrupt controller used.+- interrupt-names: should contain the interrupt name "vsync" and optionally
"lcd_sys" in the same order as they were listed inthe interrupts property.The driver already did not require both interrupts, right? Only one of them?
Right. More precisely it did not require since beginning.
So can you move it to the cleanup patch with change below?
Best regards, Krzysztof