On Wed, 13 Apr 2022 14:14:42 -0400 Alex Deucher alexdeucher@gmail.com wrote:
On Wed, Apr 13, 2022 at 1:33 PM Michele Ballabio ballabio.m@gmail.com wrote:
On Mon, 11 Apr 2022 14:34:37 -0400 Alex Deucher alexdeucher@gmail.com wrote:
On Sat, Apr 9, 2022 at 12:28 PM Michele Ballabio ballabio.m@gmail.com wrote:
On Tue, 5 Apr 2022 10:23:16 -0400 Alex Deucher alexdeucher@gmail.com wrote:
On Mon, Apr 4, 2022 at 3:39 PM Michele Ballabio ballabio.m@gmail.com wrote:
On Mon, 4 Apr 2022 13:03:41 -0400 Alex Deucher alexdeucher@gmail.com wrote:
> On Sun, Apr 3, 2022 at 10:19 AM Michele Ballabio > ballabio.m@gmail.com wrote: > > > > Hi, > > I've hit a regression on 5.17.1 (haven't tested > > 5.17.0, but 5.16-stable didn't have this problem). > > > > The machine is a Ryzen 5 1600 with AMD graphics (RX > > 560). > > > > The regression I hit seems to trigger when the machine > > is left idle at boot (I don't boot straight to X, I > > boot to a tty, login and then start X). The machine > > after a while blanks the screen. Usually, the screen > > unblanks as the keyboard is hit or the mouse moves, but > > with kernel 5.17.1 the screen does not wake up. The > > machine seems to run mostly fine: I can login from ssh, > > but I cannot reboot or halt it: a sysrq sequence is > > needed for that. Note that if the screen goes blank > > under X, it wakes up fine. > > > > Below a dmesg and two traces from syslog (they're quite > > similar). > > Can you bisect? Does setting amdgpu.runpm=0 help?
I can try to bisect, should I narrow the search to drivers/gpu/drm/ ?
I would just do a full bisect if possible in case the change happens to be outside of drm.
Setting amdgpu.runpm=0 works, the display now unblanks without problems.
Hi, I bisected this, and the first bad commit is [087451f372bf76d971184caa258807b7c35aac8f] drm/amdgpu: use generic fb helpers instead of setting up AMD own's.
Let me know if you need some more testing.
Thanks. Do the attached patches fix the issue?
Thanks,
Alex
Sorry, no. I applied them both on top of 5.17.1.
Thanks. Please try the attached patch.
Thanks,
Alex
I applied the v2 patch on top of 5.17.1 and it works as expected.
Tested-by: Michele Ballabio ballabio.m@gmail.com
Thanks, Michele Ballabio