From: ChiYuan Huang cy_huang@richtek.com
Adds support for Richtek RT4831 backlight.
Signed-off-by: ChiYuan Huang cy_huang@richtek.com Reviewed-by: Daniel Thompson daniel.thompson@linaro.org --- since v7 - Fix typo 'common' to 'commonly' in Kconfig description. --- drivers/video/backlight/Kconfig | 8 ++ drivers/video/backlight/Makefile | 1 + drivers/video/backlight/rt4831-backlight.c | 203 +++++++++++++++++++++++++++++ 3 files changed, 212 insertions(+) create mode 100644 drivers/video/backlight/rt4831-backlight.c
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index d83c87b..858f6df 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -289,6 +289,14 @@ config BACKLIGHT_QCOM_WLED If you have the Qualcomm PMIC, say Y to enable a driver for the WLED block. Currently it supports PM8941 and PMI8998.
+config BACKLIGHT_RT4831 + tristate "Richtek RT4831 Backlight Driver" + depends on MFD_RT4831 + help + This enables support for Richtek RT4831 Backlight driver. + It's commonly used to drive the display WLED. There're four channels + inisde, and each channel can provide up to 30mA current. + config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" depends on X86 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 685f3f1..cae2c83 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o +obj-$(CONFIG_BACKLIGHT_RT4831) += rt4831-backlight.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o diff --git a/drivers/video/backlight/rt4831-backlight.c b/drivers/video/backlight/rt4831-backlight.c new file mode 100644 index 00000000..42155c7 --- /dev/null +++ b/drivers/video/backlight/rt4831-backlight.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <dt-bindings/leds/rt4831-backlight.h> +#include <linux/backlight.h> +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +#define RT4831_REG_BLCFG 0x02 +#define RT4831_REG_BLDIML 0x04 +#define RT4831_REG_ENABLE 0x08 + +#define RT4831_BLMAX_BRIGHTNESS 2048 + +#define RT4831_BLOVP_MASK GENMASK(7, 5) +#define RT4831_BLOVP_SHIFT 5 +#define RT4831_BLPWMEN_MASK BIT(0) +#define RT4831_BLEN_MASK BIT(4) +#define RT4831_BLCH_MASK GENMASK(3, 0) +#define RT4831_BLDIML_MASK GENMASK(2, 0) +#define RT4831_BLDIMH_MASK GENMASK(10, 3) +#define RT4831_BLDIMH_SHIFT 3 + +struct rt4831_priv { + struct device *dev; + struct regmap *regmap; + struct backlight_device *bl; +}; + +static int rt4831_bl_update_status(struct backlight_device *bl_dev) +{ + struct rt4831_priv *priv = bl_get_data(bl_dev); + int brightness = backlight_get_brightness(bl_dev); + unsigned int enable = brightness ? RT4831_BLEN_MASK : 0; + u8 v[2]; + int ret; + + if (brightness) { + v[0] = (brightness - 1) & RT4831_BLDIML_MASK; + v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT; + + ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v)); + if (ret) + return ret; + } + + return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable); + +} + +static int rt4831_bl_get_brightness(struct backlight_device *bl_dev) +{ + struct rt4831_priv *priv = bl_get_data(bl_dev); + unsigned int val; + u8 v[2]; + int ret; + + ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val); + if (ret) + return ret; + + if (!(val & RT4831_BLEN_MASK)) + return 0; + + ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v)); + if (ret) + return ret; + + ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1; + + return ret; +} + +static const struct backlight_ops rt4831_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = rt4831_bl_update_status, + .get_brightness = rt4831_bl_get_brightness, +}; + +static int rt4831_parse_backlight_properties(struct rt4831_priv *priv, + struct backlight_properties *bl_props) +{ + struct device *dev = priv->dev; + u8 propval; + u32 brightness; + unsigned int val = 0; + int ret; + + /* common properties */ + ret = device_property_read_u32(dev, "max-brightness", &brightness); + if (ret) + brightness = RT4831_BLMAX_BRIGHTNESS; + + bl_props->max_brightness = min_t(u32, brightness, RT4831_BLMAX_BRIGHTNESS); + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = bl_props->max_brightness; + + bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness); + + /* vendor properties */ + if (device_property_read_bool(dev, "richtek,pwm-enable")) + val = RT4831_BLPWMEN_MASK; + + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val); + if (ret) + return ret; + + ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval); + if (ret) + propval = RT4831_BLOVPLVL_21V; + + propval = min_t(u8, propval, RT4831_BLOVPLVL_29V); + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK, + propval << RT4831_BLOVP_SHIFT); + if (ret) + return ret; + + ret = device_property_read_u8(dev, "richtek,channel-use", &propval); + if (ret) { + dev_err(dev, "richtek,channel-use DT property missing\n"); + return ret; + } + + if (!(propval & RT4831_BLCH_MASK)) { + dev_err(dev, "No channel specified\n"); + return -EINVAL; + } + + return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval); +} + +static int rt4831_bl_probe(struct platform_device *pdev) +{ + struct rt4831_priv *priv; + struct backlight_properties bl_props = { .type = BACKLIGHT_RAW, + .scale = BACKLIGHT_SCALE_LINEAR }; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "Failed to init regmap\n"); + return -ENODEV; + } + + ret = rt4831_parse_backlight_properties(priv, &bl_props); + if (ret) { + dev_err(&pdev->dev, "Failed to parse backlight properties\n"); + return ret; + } + + priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv, + &rt4831_bl_ops, &bl_props); + if (IS_ERR(priv->bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + return PTR_ERR(priv->bl); + } + + backlight_update_status(priv->bl); + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int rt4831_bl_remove(struct platform_device *pdev) +{ + struct rt4831_priv *priv = platform_get_drvdata(pdev); + struct backlight_device *bl_dev = priv->bl; + + bl_dev->props.brightness = 0; + backlight_update_status(priv->bl); + + return 0; +} + +static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = { + { .compatible = "richtek,rt4831-backlight", }, + {} +}; +MODULE_DEVICE_TABLE(of, rt4831_bl_of_match); + +static struct platform_driver rt4831_bl_driver = { + .driver = { + .name = "rt4831-backlight", + .of_match_table = rt4831_bl_of_match, + }, + .probe = rt4831_bl_probe, + .remove = rt4831_bl_remove, +}; +module_platform_driver(rt4831_bl_driver); + +MODULE_AUTHOR("ChiYuan Huang cy_huang@richtek.com"); +MODULE_LICENSE("GPL v2");