On Mon, Oct 1, 2012 at 9:50 PM, Stephen Warren swarren@wwwdotorg.org wrote:
On 09/30/2012 11:29 PM, Leela Krishna Amudala wrote:
Hello Stephen Warren,
The binding names that I use in my dts file should match with the names given in http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html right?
I don't think so; the binding in that link is for example:
- xres, yres: Display resolution
- left-margin, right-margin, hsync-len: Horizontal Display timing parameters
- in pixels
- upper-margin, lower-margin, vsync-len: Vertical display timing parameters in
- lines
- clock: displayclock in Hz
i.e. a bunch of separate properties, one for each value needed to describe the display timing. However, your patch contains:
I mean to say that even I have to use separate properties for each one instead of grouping them. Also the names should match with the ones given in the example..?
- samsung,fimd-display: This property should specify the phandle of the
- display device node which holds the video interface timing with the
- below mentioned properties.
- lcd-htiming: Specifies the horizontal timing for the overlay. The
horizontal timing includes four parameters in the following order.- horizontal back porch (in number of lcd clocks)- horizontal front porch (in number of lcd clocks)- hsync pulse width (in number of lcd clocks)- Display panels X resolution.A single lcd-htiming property, which contains 4 values. (and a similar construct for the vertical timing).
That seems entirely different to me... _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss